Brother International Innov-is 40 Operation Manual - Page 12
Operation panel, Flat bed attachment
View all Brother International Innov-is 40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Operation panel The operation panel, located on the front of the sewing machine, allows you to select a stitch and specify how the stitch will be sewn. Flat bed attachment The accessories are stored in the storage space in the flat bed attachment. Swing the lid of the flat bed attachment a toward you to open the storage space. a LCD (liquid crystal display) The number of the selected stitch (1), the presser foot to be used (2), the stitch length (mm) (3), and the stitch width (mm) (4) are displayed here. b Stitch length key (page 40) Use to adjust the length of the stitch. (Press the "-" side for a shorter stitch length, or press the "+" side for a longer stitch length.) c Stitch width key (page 41) Use to adjust the width of the stitch. (Press the "-" side for a more narrow stitch width, or press the "+" side for a wider stitch width.) d Automatic reverse/reinforcement stitch key (page 46) The sewing machine can be set to automatically sew reverse or reinforcement stitches at the beginning and end of the stitching. e Needle mode selection key (single/twin) (page 25) Press this key to select the twin needle sewing setting. Each time this key is pressed, the setting switches between that for single needle sewing and for twin needle sewing. a b a Flat bed attachment b Accessory compartment X The bag of accessories is in the storage space. Note ● Place the accessories in the bag before storing them in the flat bed attachment. If the accessories are not placed in the accessory bag when stored in the flat bed attachment, accessories may fall out and be lost or damaged. 10