Brother International Innov-is 40 Operation Manual - Page 57
Remove the basting stitching.
View all Brother International Innov-is 40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Position the fabric with the edge of the folded e hem against the guide of the presser foot, and then lower the presser foot lever. R a c b a Wrong side of fabric b Fold of hem c Presser foot guide Press the "-" side of the stitch width key to f adjust the stitch width until the needle slightly catches the fold of the hem, and then sew with the edge of the fabric against the presser foot guide. a R b c Memo If the needle is incorrectly positioned, the stitching results will be as shown below. Correct each result as described below. ● If the needle catches too much of the hem fold The needle is positioned too far to the left. Press the "+" side of the stitch width key to adjust the needle position so that the needle slightly catches the fold of the hem. 3 a b a Wrong side of fabric b Right side of fabric ● If the needle does not catch the hem fold The needle is positioned too far to the right. Press the "-" side of the stitch width key to adjust the needle position so that the needle slightly catches the fold of the hem. a Needle b Needle drop point c Fold of hem CAUTION ● Slowly turn the handwheel toward you and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. a b a Wrong side of fabric b Right side of fabric ● For details, refer to "Adjusting the stitch length and width" (page 40). Remove the basting stitching. g a b a Wrong side of fabric b Right side of fabric 55