Brother International Innov-is 40 Operation Manual - Page 24
Hold the thread with your right hand so
View all Brother International Innov-is 40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
GETTING READY Slide the spool cap onto the spool pin. f While holding the spool with your right hand, g and then pass the thread under the thread guide. Memo ● When sewing with fine, cross-wound thread, use the small spool cap, and leave a small space between the cap and the spool. cb a a Spool cap (small) b Spool (cross-wound thread) c Space ● When using thread that winds off quickly, such as transparent nylon thread or metallic thread, place the spool net over the spool before placing the spool of thread onto the spool pin. If the spool net is too long, fold it to fit the size of the spool. When the spool net is used, the tension of the upper thread will slightly increase. Be sure to check the thread tension. For details, refer to "Adjusting the thread tension" (page 47). 1 2 1 a Thread guide Pass the thread under the thread guide cover h from the back to the front. Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide cover with your left hand. a a Thread guide cover Thread the machine by guiding the thread i along the path indicated by the number on the machine. 3 4 a Spool net b Spool c Spool cap d Spool pin 22