Brother International Innov-is 40 Operation Manual - Page 33
Replacing the Presser Foot
View all Brother International Innov-is 40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Replacing the Presser Foot Presser foot precautions 1 Be sure to observe the following precautions concerning the presser feet. CAUTION ● Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the needle may hit the presser foot, causing the needle to bend or break. ● Only use presser feet designed specifically for this sewing machine. Use of any other presser foot may result in injuries or damage to the machine. Replacing the presser foot Raise the presser foot lever. c Replace the presser foot as described below. Press (needle position button) once or a twice to raise the needle. a a Needle position button Turn off the sewing machine. b a Presser foot lever Press the black button at the back of the d presser foot holder to remove the presser foot. a b CAUTION ● Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if the start/stop button is accidentally pressed and the machine starts sewing. ● Make sure that the presser foot is installed in the correct direction, otherwise the needle may strike the presser foot, causing it to break and cause injuries. a Black button b Presser foot holder 31