Brother International IntelliFax-4750 Service Manual - Page 124

WSW No. WSW37 WSW38 WSW39 WSW40 WSW41 WSW42 WSW43 Firmware Switches (WSW01 through WSW43) Continued Function setting 15 Function setting 16 Function setting 17 Function setting 18 Function setting 19 Function setting 20 Function setting 21 Function Reference Page V-47 V-48 V-49 V-50 V-51 V-52 V-53 n Operating Procedure (1) Press the 1 and 0 keys in this order in the initial stage of the maintenance mode. The equipment displays the "WSW00" on the LCD and becomes ready to accept a firmware switch number. (2) Enter the desired number from the firmware switch numbers (01 through 43). The following appears on the LCD: WSWXX = 0 0 0 0 0 0 0 0 (3) Use the and keys to move the cursor to the selector position to be modified. (4) Enter the desired number using the 0 and 1 keys. (5) Press the Set key. This operation saves the newly entered selector values onto the EEPROM and readies the equipment for accepting a firmware switch number. (6) Repeat steps (2) through (5) until the modification for the desired firmware switches is completed. (7) Press the Set or Stop key to return the equipment to the initial stage of the maintenance mode. NOTES: • To cancel this operation and return the equipment to the initial stage of the maintenance mode during the above procedure, press the Stop key. • If there is a pause of more than one minute after a single-digit number is entered for double-digit firmware switch numbers, the equipment will automatically return to the initial stage of the maintenance mode. n Note The user-accessible selectors of the firmware switches are shaded in the tables given on the following pages. V - 10