Brother International IntelliFax-4750 Service Manual - Page 57
Rear Cover, 1.2 Access Plates R and F
View all Brother International IntelliFax-4750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
1.1 Rear Cover (1) FAX8350P and FAX8750P: Remove the sub rear cover. (2) Remove the three screws (two "a" and one "b") from the rear cover. Screw "b" is provided on those models available with a 2nd paper cassette (as an option or standard). (3) Lightly pressing sections "X," pull out the rear cover. "a" and "b": Screw, pan (washer) M4x10DB 1.2 Access Plates R and F (1) Remove screw "c" that secures access plates R and F together to the main chassis. (2) Remove screws "d" and "e" from access plate R. (3) Take out access plates R and F together. (4) Remove screw "f" to separate those access plates. n Reassembling Notes "c," to "f": Taptite, cup S M3x6 (Tightening torque: 0.5 N•m) • When reinstalling access plate F, fit the two tabs provided on the front end underneath the center edge of the main chassis. IV - 4