Brother International IntelliFax-4750 Service Manual - Page 67
See IV-12.
![]() |
View all Brother International IntelliFax-4750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
n Reassembling Notes • The document take-in roller and separation roller are compatible with each other. Their gears are also compatible with each other. However, their shafts are not compatible. The document take-in roller shaft should be a white one; the separation roller shaft should be a black one. When setting these shaft to their rollers, fit the groove provided in each shaft over the longer boss provided on each roller. • When reinstalling the scanner motor, fit it in the latch provided on the scanner frame with the connector facing up and then secure it with the screw. (See page IV-12.) • When setting the scanner frame ASSY back into place, be sure to - route the scanner motor harness through the hook on the top cover as shown on page IV-11 and connect it to the scanner motor, - route the CIS harness through the hook on the top cover as shown on page IV-11 and connect it to the CIS unit (if the CIS unit is not mounted, route the CIS harness through the left-hand cutout provided in the scanner frame ASSY), and - route the panel-main harness through the right-hand cutout provided in the scanner frame ASSY. IV - 14
![](/manual_guide/products/brother-international-8750p-service-manual-4676792/67.png)