Brother International Isodore„ Innov-ís 5000 Users Manual - English - Page 85

f Remove the fabric over. basting stitches and turn the a b SEWING THE STITCHES Appliqué a Use a temporary spray adhesive, fabric glue or a basting stitch to attach the appliqué to the fabric. * This will keep the fabric from moving during sewing. a a Wrong side of fabric b Right side of fabric Memo Blind hem stitches cannot be sewn if the left needle drop point does not catch the fold. If b 3 the needle catches too much of the fold, the Utility Stitches fabric cannot be unfolded and the seam appearing on the right side of the fabric will be very large, leaving an unattractive finish. If you a Appliqué b Fabric glue experience either of these cases, follow the instructions below to solve the problem. b Select or . ■ If the Needle does not Catch the Fold Adjust the width so that the needle slightly catches the fold by pressing in the width display. * Adjust the stitch length and width to correspond to the appliqué shape, size, and quality of material (see page 42). Memo For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. c Attach needle presser foot "J". Check that the drops slightly off the edge of the appliqué, then start sewing. ■ If the Needle Catches Too Much of the Fold Adjust the width so that the needle slightly catches the fold by pressing in the width display. a Appliqué material a a a Needle drop position 73