Brother International KE-430D Instruction Manual - English - Page 28
Connecting the power cord, INSTALLATION, <For single-phase specifications>
View all Brother International KE-430D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3. INSTALLATION 3-14. Connecting the power cord Insert the power cord plug (1) into a wall outlet. 1. Attach an appropriate plug to the power cord (2). (The green and yellow wire is the ground wire.) 2. Insert the power plug into a properly-grounded AC power supply. * The inside of the control box uses single-phase power. NOTE: ・ If the ground connection is not secure, electric shocks, operating errors or damage to electronic components such as P.C. boards may occur. ・ Do not use extension cords. They may cause problems with correct operation of the sewing machine. Green/yellow wire (Ground wire) 4114M 21 KE-430D, BE-438D
3. INSTALLATION
21
KE-430D, BE-438D
3-14. Connecting the power cord
<For single-phase specifications>
Insert the power cord plug (1) into a wall outlet.
<For three-phase specifications>
1.
Attach an appropriate plug to the power cord (2). (The green
and yellow wire is the ground wire.)
2. Insert the power plug into a properly-grounded AC power
supply.
*
The inside of the control box uses single-phase power.
NOTE:
・
If the ground connection is not secure, electric shocks,
operating errors or damage to electronic components such
as P.C. boards may occur.
・
Do not use extension cords. They may cause problems with
correct operation of the sewing machine.
4114M
<Single-phase
specifications>
<Three-phase
specifications>
Green/yellow wire
(Ground wire)