Brother International MFC-210C Users Manual - English - Page 77
Remote Retrieval, Using your Remote Access Code
UPC - 012502610830
View all Brother International MFC-210C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Remote Retrieval You can call your MFC from any touch tone telephone or fax machine, then use the Remote Access Code and remote commands to retrieve fax messages. Be sure to cut out the Remote Retrieval Access Card on the last page and keep it with you at all times. Using your Remote Access Code 1 Dial your fax number from a telephone or another fax machine using touch tone. 2 When your MFC answers, immediately enter your Remote Access Code (3 digits followed by ). 3 The MFC signals if it has received fax messages: 1 long beep - Fax messages No beeps - No messages 4 The MFC gives two short beeps to tell you to enter a command. The MFC will hang up if you wait longer than 30 seconds to enter a command. The MFC will beep three times, if you enter an invalid command. 5 Press 90 to reset the MFC when you've finished. 6 Hang up. If your MFC is set to Manual mode and you want to use the remote retrieval features, you can access your MFC by waiting about 2 minutes after it starts ringing, and then entering the Remote Access Code within 30 seconds. REMOTE FAX OPTIONS (MFC-420CN ONLY) 6 - 5