Brother International MFC-6550MC Users Manual - English - Page 218
Paper Handling Problems
View all Brother International MFC-6550MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
MFC 4550/6550MC/7550MC OP-US-5.0 TROUBLESHOOTING PROCEDURES Paper Handling Problems Question Recommendation The MFC does not load paper. The LCD shows CHECK PAPER or PRINTER JAM. • Check to see if the CHECK PAPER or PRINTER JAM message appears on the LCD. If so, the multipurpose sheet feeder may be out of paper or not properly installed. If it is empty, load a new stack of paper into the feeder. • Ifthereispaperinthemultipurposesheetfeeder,makesure it is straight. If the paper is curled, you should straighten it. Sometimes it is helpful to remove the paper, turn the stack over and put it back into the paper tray. • Reduce the amount of paper in the multipurposesheet feeder, then try again. The MFC does not load Reinsert the paper firmly, one sheet at a time. paper from the manual feed stop. How can I load envelopes? You can load envelopes from either the multipurpose sheet feeder or the manual feed slot. Your application software must be set up to print the envelope size you are using. This is usually done in the Page Setup or Document Setup menu of your software. Refer to your application manual. What paper can I use? You can use plain paper, envelopes, transparencies, labels, and organizer paper. For information on loading paper. See "Acceptable Paper" in Chapter 10. How can I clear paper See "Paper Jams" on page 14-6. jams? 16-13