Brother International MFC-9100C Users Manual - English - Page 110
Receiving Messages into the PC, Multi-Function Link® Pro Mode, Multi-Function Link, Pro Mode
View all Brother International MFC-9100C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
IMPORTANT Please see the README.WRI file in the root directory of the CD-ROM (or diskette) for last minute important installation and troubleshooting information. Receiving Messages into the PC To receive faxes into your PC through the MFC: (See Connecting the MFC to the Computer, page 12-3.) 1 Make sure the MFC is connected to the PC. The PC and the Multi-Function Link® Pro Main Menu must be running at all times. 2 Load the Multi-Function Link® Pro software into your PC. (See Installing Multi-Function Link® Pro Software (CD-ROM 1) page 12-4.) 3 On your PC in the Multi-Function Link® Pro software: A Select Setup from the Preferences... pull-down menu in the Main Menu. B Under Answer Mode select Fax only. C Click the OK button. 4 Check that the Multi-Function Link® Pro mode is ON (see below). Multi-Function Link® Pro Mode You can switch Multi-Function Link® Pro Mode on and off as needed. If you want your fax messages to go directly into your PC, make sure the MF Link setting is ON. If you want faxes to print on your MFC when they arrive, you can switch MF Link mode to OFF. (See On-Line Documentation for Multi-Function Link® Pro on the Brother CD-ROM and Using the Multi-Function Link® Pro Software Chapter 15, page 15-1.) 1 Press Function , 1 , 2 , 8 . 2 Press or to select ON (or OFF) and press Set . 3 Press Stop to exit. 12 - 8 SETTING UP THE MFC AND COMPUTER