Brother International MFC 9760 Owners Manual - Page 100
Optional Accessories, Memory Board, Installing the Optional Memory Board
View all Brother International MFC 9760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
11 Optional Accessories Memory Board The memory board is installed on the main controller board inside the machine. When you add the optional memory board, it increases the performance for printer and copy operations. Model Name Optional Memory (recommended) MFC-9760 with Standard Memory: 8MB 16 MB BUFFARO TECHNOLOGY 12323-0001 32 MB BUFFARO TECHNOLOGY 12324-0001 In general, the DIMM must have the following specifications: Type: CAS Lantency: Clock Frequency: Capacity: Height: Parity: DRAM Type: 100 pin and 32 bit output 2 or 3 66 MHz or more 16 or 32 MB 46 mm (1.8 inches) or less NONE SDRAM 4 Bank Some DIMMs may not work with the machine. For more information, consult the dealer where you purchased the machine. For the latest information from Brother visit: http://solutions.brother.com Installing the Optional Memory Board 1 Switch off, unplug the machine power cord from the AC mains outlet, and then disconnect the interface cable. • Switch off and unplug the machine before installing (or removing) the memory board. • Do NOT touch the surface of the main board within 15 minutes after unpluging the power cord. 94 Chapter 11