Brother International MFC 9760 Owners Manual - Page 79

Out Of Memory, Paper Jam, Pls Clean Drum, Pls Open Cover, Machine Error Xx, Toner Empty, Error Message

Page 79 highlights

ERROR MESSAGE CAUSE ACTION OUT OF MEMORY The machine memory capacity has (When the machine is been exceeded. used as a printer.) - Press Reset to delete data remaining in the memory of the machine. - If you have installed the Windows® driver, try again after setting the True Type mode to "Print as Graphics" in the PRINT menu of your application software. - Reduce the print resolution or reduce the complexity of your document. - Expand the printer memory with the optional memory board. OUT OF MEMORY The machine memory capacity has (When the machine is been exceeded. used as a copier.) See Out of Memory Message, page 14. PAPER JAM The recording paper is jammed in the See Printer Jam or Paper Jam, machine. page 74. PLS CLEAN DRUM The primary corona wire of drum unit Clean the primary corona wire of is dirty. drum unit. (See Cleaning the Drum Unit, page 83.) PLS OPEN COVER A page, piece of paper or paper clip, Open the front cover and remove etc. may be jammed inside the the drum unit. If you see any machine. jammed paper or other item, gently pull it out. Reinstall the drum unit, then close the front cover. If the error message remains, open and close the front cover again. If the machine cannot reset itself and return to copy status prompt, it will display MACHINE ERROR XX. Then contact your Brother dealer for service. TONER EMPTY Toner is used up and printing is not possible, or toner cartridge is not installed into the drum unit. Replace the toner cartridge with a new one, or install the toner cartridge into the drum unit. (See Replacing the Toner Cartridge, page 84.) MAINTENANCE Troubleshooting and Maintenance 73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109

Troubleshooting and Maintenance
73
MAINTENANCE
OUT OF MEMORY
(When the machine is
used as a printer.)
The machine memory capacity has
been exceeded.
-
Press
Reset
to delete data
remaining in the memory of
the machine.
-
If you have installed the
Windows
®
driver, try again
after setting the True Type
mode to “Print as Graphics” in
the PRINT menu of your
application software.
-
Reduce the print resolution or
reduce the complexity of your
document.
-
Expand the printer memory
with the optional memory
board.
OUT OF MEMORY
(When the machine is
used as a copier.)
The machine memory capacity has
been exceeded.
See
Out of Memory Message
, page
14.
PAPER JAM
The recording paper is jammed in the
machine.
See
Printer Jam or Paper Jam
,
page 74.
PLS CLEAN DRUM
The primary corona wire of drum unit
is dirty.
Clean the primary corona wire of
drum unit. (See
Cleaning the
Drum Unit
, page 83.)
PLS OPEN COVER
A page, piece of paper or paper clip,
etc. may be jammed inside the
machine.
Open the front cover and remove
the drum unit. If you see any
jammed paper or other item, gently
pull it out. Reinstall the drum unit,
then close the front cover. If the
error message remains, open and
close the front cover again. If the
machine cannot reset itself and
return to copy status prompt, it will
display
MACHINE ERROR XX
.
Then contact your Brother dealer
for service.
TONER EMPTY
Toner is used up and printing is not
possible, or toner cartridge is not
installed into the drum unit.
Replace the toner cartridge with a
new one, or install the toner
cartridge into the drum unit. (See
Replacing the Toner Cartridge
,
page 84.)
ERROR MESSAGE
CAUSE
ACTION