Brother International MFC-J6920DW Quick Setup Guide - Page 3
Caution
View all Brother International MFC-J6920DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
c Connect the telephone line cord. Connect one end of the telephone line cord to the jack marked LINE on the machine. Carefully guide the telephone line cord into the cable channel and out the back of the machine. Connect the other end to a modular wall jack. NOTE If you are sharing one telephone line with an external telephone, connect it as shown below. Before you connect the external telephone, remove the white protective cap c from the EXT. jack on the machine. 1 2 IMPORTANT The telephone line cord MUST be connected to the jack marked LINE on the machine. d Gently close the scanner cover using the finger holds on each side. 3 a Extension telephone b External telephone c Protective cap NOTE If you are sharing one telephone line with an external telephone answering machine, connect it as shown below. Before you connect the external telephone answering machine, remove the white protective cap a from the EXT. jack on the machine. CAUTION Be careful not to pinch your fingers when you close the scanner cover. Always use the finger holds provided on each side of the scanner cover when opening and closing it. 1 a Protective cap Set the receive mode to External TAD if you have an external answering machine. See Choose the correct Receive Mode on page 12. For additional details, see Connecting an external TAD (telephone answering device) in chapter 6 of the Basic User's Guide. 3