Brother International MFC-J6935DW Basic Users Guide - Page 78
MFC-J6935DW Slowly push Tray #1
View all Brother International MFC-J6935DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
IMPORTANT • If the print head is in the right corner as shown in the illustration, you cannot move the print head. Close the scanner cover, and then reconnect the power cord. Open the scanner cover again, and then hold down until the print head moves to the center. Then unplug the machine from the power source and take out the paper. 8 Gently close the scanner cover using the finger holds on each side. 9 (MFC-J6535DW) Slowly push Tray #1 completely into the machine. • If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head to take out the paper. • If ink gets on your skin or clothing, immediately wash it off with soap or detergent. (MFC-J6935DW) Slowly push Tray #1 and Tray #2 (if removed) completely into the machine. 10 Reconnect the power cord. If there is a repeat paper jam, a small piece of paper may be stuck in the machine. See Related Information: Remove Paper Scraps. 64