Brother International MFC8700 Users Manual - English - Page 100

Before You Install Brother Printer Driver, If You Don’t Have a CD-ROM Drive, Computer Requirements - drivers

Page 100 highlights

Before You Install Brother Printer Driver If You Don't Have a CD-ROM Drive All software is supplied on CD-ROM. If you need a Floppy Disk version for the MFC 8300's Printer Driver (DSK8331 for Windows® 3.1x or DSK8395 for Windows® 95/98), call Brother at USA: 1-888-879-3232 From within Canada: 1-800-668-2768 From within Montreal: 1-514-685-6464 To order the appropriate set of disks, you must tell the Brother Representative the version of Windows® you are using and your Brother model number. Computer Requirements The following are the minimum computer requirements you need to set up and operate the MFC as a printer. Use only a shielded interface cable that is IEEE-1284 compliant, and that is less than 6 feet (1.8 meters) long, or USB cable. CPU 80486/66MHz or higher (Windows® 3.1x or 95) Pentium 75 or Higher (Windows® 98 or Windows NT® Workstation Version 4.0) RAM 8MB or greater for Windows® 3.1x 8MB or greater for Windows® 95 (16MB recommended) 16MB or greater for Windows® 98 or Windows NT® Workstation Version 4.0 (32MB recommended) Hard Disk Drive 10MB Available Disk Space Operating System Windows® 3.1x, 95/98 or NT® Workstation Version 4.0, DOS environment compatible with your Windows® version 12 - 2 SETUP BROTHER MACHINE WITH PC

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183

12 - 2
SETUP
BROTHER
MACHINE
WITH
PC
Before You Install Brother Printer Driver
If You Don’t Have a CD-ROM Drive
All software is supplied on CD-ROM. If you need a Floppy Disk
version for the MFC 8300’s Printer Driver (DSK8331 for Windows
®
3.1
x
or DSK8395 for Windows
®
95/98), call Brother at
USA:
1-888-879-3232
From within Canada:
1-800-668-2768
From within Montreal:
1-514-685-6464
To order the appropriate set of disks, you must tell the Brother
Representative the version of Windows
®
you are using and your Brother
model number.
Computer Requirements
The following are the minimum computer requirements you need to set up
and operate the MFC as a printer. Use only a shielded interface cable that
is IEEE-1284 compliant, and that is less than 6 feet (1.8 meters) long, or
USB cable.
CPU
80486/66MHz or higher
(Windows
®
3.1
x
or 95)
Pentium 75 or Higher (Windows
®
98 or Windows
NT
®
Workstation Version 4.0)
RAM
8MB or greater for Windows
®
3.1
x
8MB or greater for Windows
®
95
(16MB recommended)
16MB or greater for Windows
®
98 or Windows NT
®
Workstation Version 4.0 (32MB recommended)
Hard Disk Drive
10MB Available Disk Space
Operating System
Windows
®
3.1
x
, 95/98 or NT
®
Workstation Version
4.0, DOS environment compatible with your
Windows
®
version