Brother International PC-210PRW Users Manual - English - Page 36
Adjusting the pressure of the presser foot
![]() |
View all Brother International PC-210PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
GETTING READY CONTENTS Place a different presser foot below the holder 5 so that the presser foot pin is aligned with the notch in the holder. Position the presser foot so the letter indicating the presser foot type (A, G, I, J, M, N or R) is positioned to be read. 1 Adjusting the pressure of the presser foot The amount of pressure that the presser foot applies to the fabric can be adjusted. Lower the presser foot lever. 1 GETTING READY SEWING BASICS UTILITY STITCHES 2 3 1 Presser foot holder 2 Notch 3 Pin Slowly lower the presser foot lever so that the 6 presser foot pin snaps into the notch in the presser foot holder. 1 1 Presser foot lever Turn the presser foot dial at the back of the 2 sewing machine. The scale on the dial indicates the range from 1 (weak) to 4 (strong). Turn the dial to the right (smaller number) to decrease the pressure. Turn the dial to the left (large number) to increase the pressure. 1 1 Presser foot lever X The presser foot is attached. Raise the presser foot lever to check that the 7 presser foot is securely attached. Note ● For details on the presser foot that should be used with the selected stitch, refer to "Stitch Settings" (page 92). Strong 3 Weak When you are finished sewing, reset the dial 3 to 3 (standard). APPENDIX INDEX 30
![](/manual_guide/products/brother-international-pc210prw-users-manual-english-df60968/36.png)