Brother International PC-210PRW Users Manual - English - Page 37
Removing the presser foot holder, Using the optional walking foot
View all Brother International PC-210PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Removing the presser foot holder Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the quilting foot. Use the screwdriver to remove the presser foot holder. ■ Removing the presser foot holder Remove the presser foot. 1 • For details, refer to "Replacing the presser foot" (page 29). Use the screwdriver to loosen the presser foot 2 holder screw. 1 1 Screwdriver ■ Attaching the presser foot holder Align the presser foot holder with the lower1 left side of the presser bar. Using the optional walking foot With the walking foot, both pieces of fabric are fed evenly by the feed dogs and the teeth on the presser foot. This is useful when sewing fabrics that are hard to feed such as vinyl and leather and when sewing fabrics that easily slip such as velvets or when quilting. Use the screwdriver to attach the walking foot. ■ Attaching the walking foot Remove the presser foot holder. 1 • For details, refer to "Removing the presser foot holder" (at the left). Hook the connecting fork of the walking foot 2 onto the needle clamp screw. 1 2 Hold the presser foot holder in place with 2 your right hand, and then tighten the screw using the screwdriver in your left hand. 1 Connecting fork 2 Needle clamp screw Lower the presser foot lever, insert the presser 3 foot holder screw, and then tighten the screw with the screwdriver. 1 APPENDIX INDEX 1 1 Screwdriver Note ● If the presser foot holder is not correctly installed, the thread tension will be incorrect. 1 Presser foot holder screw Replacing the Presser Foot 31