Brother International PC-3000 Users Manual - English - Page 58

Button Sewing

Get Brother International PC-3000 PDF manuals and user guides View all Brother International PC-3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

BUTTON SEWING 23 1 M For attaching buttons 1. Raise the presser foot lever and slide the feed dog adjustment lever to the right in order to lower the feed dog. 1 Feed dog adjustment lever (Slide off the accessory compartment to expose the lever.) 2. Attach button fitting foot "M", place the button into the presser 5 foot, and then lower the presser foot. 6 5 3. Turn the balance wheel to check that the needle goes into each of the holes in the button correctly, and then start sew- ing. To adjust the button sewing stitch width, touch the stitch width keys " " or " " to select the desired width. The sewing machine will stop automatically when the sewing is 6 finished. * If extra attachment strength is needed, carry out the button sewing operation twice. 4. Once sewing is completed, return the feed dogs to their original position, pull on the bobbin thread at the end of the stitches to pull the upper thread through to the reverse side of the fabric, then tie the thread ends together. 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
55
BUTTON SEWING
1.
Raise the presser foot lever and slide the feed dog adjust-
ment lever to the right in order to lower the feed dog.
1
Feed dog adjustment lever (Slide off the accessory com-
partment to expose the lever.)
4.
Once sewing is completed, return the feed dogs to their origi-
nal position, pull on the bobbin thread at the end of the stitches
to pull the upper thread through to the reverse side of the fab-
ric, then tie the thread ends together.
2.
Attach button fitting foot
“
M
”
, place the button into the presser
foot, and then lower the presser foot.
3.
Turn the balance wheel to check that the needle goes into
each of the holes in the button correctly, and then start sew-
ing. To adjust the button sewing stitch width, touch the stitch
width keys
“
”
or
“
”
to select the desired width. The
sewing machine will stop automatically when the sewing is
finished.
*
If extra attachment strength is needed, carry out the button
sewing operation twice.
For attaching buttons
23
6
5
6
5
1
M