Brother International PC-3000 Users Manual - English - Page 89
Sewing
View all Brother International PC-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Sewing 5 6 1. Attach presser foot "N". 2. Place the fabric under the presser foot, pull the upper thread out to the side and then lower the presser foot. * Be sure that the material is positioned so that pattern will be sewn facing the correct direction. 1 1 Needle hole reference line 3. Push the "START/STOP" button to start sewing. 5 4. Once sewing of the font has been completed, the sewing machine will automatically sew reinforcement stitches, and then stop. When sewing continuous patterns, push the "START/STOP" but- 6 ton to stop the sewing machine, then push the "REVERSE STITCH" button to sew reinforcement stitches. 5. When sewing is completed, trim any excess thread. 86
86
Sewing
1.
Attach presser foot
“
N
”
.
2.
Place the fabric under the presser foot, pull the upper thread
out to the side and then lower the presser foot.
*
Be sure that the material is positioned so that pattern will be
sewn facing the correct direction.
1
Needle hole reference line
3.
Push the
“
START/STOP
”
button to start sewing.
6
5
4.
Once sewing of the font has been completed, the sewing
machine will automatically sew reinforcement stitches, and then
stop.
When sewing continuous patterns, push the
“
START/STOP
”
but-
ton to stop the sewing machine, then push the
“
REVERSE
STITCH
”
button to sew reinforcement stitches.
5.
When sewing is completed, trim any excess thread.
1
6
5