Brother International PDP350CJ Owner's Manual - English - Page 20

Inserting Paper You have three ways to insert paper for printing: S Manually, one sheet at a time from the paper support on the back of the Ensemble unit. (See below.) S Manually, one sheet at a time from the front paper tray of the optional cut sheet feeder (page 14). S Automatically, up to 30 sheets from the back paper tray with the optional cut sheet feeder (page 12). "To manually insert paper from the paper support: 1. Turn on Ensemble and open the paper support. CAUTION: Do not use the platen knob to insert paper. For proper paper insertion, you must use the PAPER INSERT key. The platen knob should only be used to remove jammed paper. Portrait Orientation Landscape Orientation B A4 LTR B5 To install the paper guide sticker: 1. Remove the adhesive backing from the strip. With the text facing you, hold the strip by the right edge. 2. Push the left edge of the strip up against the right side of the raised section that is point B. 3. With the edges butted together, gently push the adhesive strip onto the paper guide area. 2. Center and hold a sheet of paper in the paper support using the marks on the paper support. If paper is 8.5" wide or less, align the paper with mark A. If paper is wider than 8.5", use the alignment marks on the paper guide sticker. (See box at left for instructions on installing the sticker.) Alignment marks are provided for landscape printing with A4, Letter and B5 paper sizes. For A3 portrait positioning, use the A4 landscape mark. For B4 portrait positioning, use the B5 landscape mark. For any other paper widths greater than 8.5", estimate your paper alignment between points A and B. B A A4 LTR B5 3. Press PAPER INSERT to automatically advance the paper to the printing position. 4. If paper appears to be crooked, press and hold PAPER INSERT to take the paper completely out, then reinsert it. Getting Started 9