Brother International PT-1810 Users Manual - English and Spanish - Page 65

TAPE MARGIN FUNCTION The Tape margin function allows you to adjust the size of the margins on the left and right sides of your text. The default tape margin setting is FULL; however, three other settings are also available. FULL (1" (25 mm margins)) NONE (no margins) NARROW (1/6" (4 mm margins)) HALF (1/2" (12 mm margins))  After printing a label using the NONE tape margin setting, hold down and press Feed once to feed the tape before pushing down on the tape cutter lever to cut it. Otherwise some of the printed characters may be cut off. After printing using the NARROW and HALF tape margin settings, push down on the tape cutter lever to cut off the label, then use scissors to cut along the printed dots (:) to center the text within the label. To change the tape margin setting: 1 While holding down Tape , press once, and keep held down to dis- play the current tape margin setting. 2 While still holding down margin setting is displayed. Tape , continue pressing until the desired tape 3 Release to apply the selected tape margin setting to the entire text. 61