Brother International PT-1810 Users Manual - English and Spanish - Page 82
CAN'T, CHANGE, ADAPTOR, CUTTER, ERROR, INVAL., LENGTH, LIMIT, Tab Length, Error Message, Cause, Remedy
UPC - 012502525943
View all Brother International PT-1810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Error Message CAN'T HERE! CHANGE ADAPTOR CUTTER ERROR! INVAL. CHRS! LENGTH LIMIT! 78 Cause Remedy • This message appears if the cursor is at the end of the text when you hold down and press Number . • Move the cursor below a number before holding down and press- Number ing . • This message appears if a high-voltage adaptor is being used. • Remove the high-voltage adaptor and connect the adaptor designed exclusively for this machine. • This message appears if the tape cutter lever is pressed down while a label is being printed. • Release the tape cutter lever. • This message appears if the cursor is not below a number when you hold down and press Number . • Move the cursor below a number before holding down and press Number . • This message appears if the text is longer than 1 meter when you try to print. • Shorten the text to less than 1 meter before trying to print. • This message appears if the Length function is used to set a label length that is less than 1.6" (4.0 cm) or more than 11.8" (30.0 cm). • Set the label length between 1.6" (4.0 cm) and 11.8" (30.0 cm). • This message appears if the Tab Length function is used to set a tab length that is more than 11.8" (30.0 cm). • Set the tab length so that it is less than 11.8" (30.0 cm).