Brother International PT-1810 Users Manual - English and Spanish - Page 69
Length Function
UPC - 012502525943
View all Brother International PT-1810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
LENGTH FUNCTION Although the length of the printed label automatically adjusts to fit the length of the entered text, there may be times when you will want to make a label with a specific length. The Length function allows you to set the label length between 1.6" and 11.8" (4.0 cm and 30.0 cm). The default length setting is OFF. When the Length function is set to ON, the Length indicator on the right side of the display lights up. Turning off the machine and turning it on again changes the length setting back to OFF. To turn on or off the Length function: 1 While holding down Length , press once, and keep held down to dis- play the current length of the label (the text and both margins) briefly, then display the current label length setting (ON or OFF). 2 While still holding down Length , continue pressing until the desired label length setting is displayed. The Length indicator lights up when ON is selected. 3 Release . If ON was selected, the current label length setting is displayed. 4 Press Home or End to select the desired length or use the number keys to enter the length. To change the units (inches or centimeters) used to display the label length, press until the desired units are displayed. To change the length in 1" (1.0-cm)-steps, hold down either Home or , End and then release the key when the desired setting is displayed. 5 Press . 65