Brother International RH-981A Instruction Manual - Spanish - Page 12
INSTALLATION, 3-1. Table processing diagram - rh 981 a
![]() |
View all Brother International RH-981A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3. INSTALLATION 3. INSTALLATION CAUTION Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine weighs more than 87 kg. The installation should be carried out by two or more people. Do not connect the power cord until installation is complete, otherwise the machine may operate if the start switch is pressed by mistake, which could result in injury. All cords should be secured at least 25 mm away from any moving parts. Furthermore, do not excessively bend the cords or secure them too firmly staples, otherwise there is the danger that fire or electric shocks could occur. Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious electric shock, and problems with correct operation may also occur. Install the belt covers to the machine head and motor. 3-1. Table processing diagram The top of the table should be 50 mm in thickness and should be strong enough to hold the weight and withstand the vibration of the sewing machine. Drill holes in the table as shown in the diagram below. * There is the special table indicated below. Model code Table/legs assembly 127-981-04902 RH-981A 5 0800Q
![](/manual_guide/products/brother-international-rh981a-instruction-manual-spanish-f6efe4a/12.png)