Brother International SB7900E Operation Manual - Page 33
If the spool or the spool cap is not, positioned correctly, the thread may, become tangled around
View all Brother International SB7900E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Open the top cover. d Slide the spool cap onto the spool pin. g Slide the spool cap as far as possible to the right, as shown, with the rounded side on the left. 1 Remove the spool cap that is inserted onto the e spool pin. 1 2 a Spool pin b Spool cap Place the spool of thread onto the spool pin. f Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom. While holding the thread lightly with your h right hand, pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front. 1 CAUTION ● If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin or the needle may break. a Thread guide cover Pass the thread under the thread guide plate, i and then pull it up. 1 a Thread guide plate Upper Threading 31