Brother International SB7900E Operation Manual - Page 36
Threading the needle manually, without using the needle threader
View all Brother International SB7900E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
GETTING READY Raise the presser foot lever, pass the end of the e thread through the embroidery foot hole. Threading the needle manually (without using the needle threader) X The upper threading is finished. Now that the upper threading and the lower threading are finished, you are ready to start embroidering. When using special thread, thread with a thickness of 130/20 or thicker which cannot be used with the needle threader, thread the needle as described below. Thread the machine to the needle bar thread a guide. • For details, refer to "Threading the upper thread" (page 30). Lower the presser foot lever. b Note z If the needle is not raised, the needle threader cannot thread the needle. Be sure to press (Needle position button) to raise the needle before using the needle threader. 1 a Pressor foot lever Pass the thread through the eye of the needle c from front to back. Raise the presser foot lever, pass the end of the d thread through the embroidery foot hole. 34