Brother International SB7900E Operation Manual - Page 83
Adjusting the LCD, Operation beep
View all Brother International SB7900E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Adjusting the LCD Operation beep If nothing appears on the LCD when the machine is turned on, the brightness of the LCD is either too light or too dark. In such a case, perform the following operation. Turn off the machine. a Each time a key is pressed you will hear one beep. If an incorrect operation is performed you will hear two or four beeps. ■ If a key is pressed (correct operation) One beep sounds. ■ If an incorrect operation is performed Two or four beeps sound. ■ If the machine locks up, for example, because the thread is tangled The machine beeps for four seconds and the Turn on the machine while pressing any of the b display panel buttons. machine automatically stops. Be sure to check for the cause of the error, and 3 correct it before continuing to embroider. Press c or . Turn off the machine, then turn it on again. d Troubleshooting 81