Brother International SB7900E Operation Manual - Page 79
Embroidery not, neatly done
View all Brother International SB7900E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Symptom Probable Cause Remedy Reference The fabric is not fully stretched on the embroidery frame. The fabric is loose. Stretch the fabric properly on the embroidery frame. page 43 No stabilizer material is attached. Always use stabilizer material for embroidery with stretch fabrics, thin fabrics, fabrics with a loose weave and fabrics where stitches easily contract. page 42 The thread is tangled and the bobbin case, etc., is plugged up. Remove the tangled thread. When the bobbin case is plugged up, clean the race. page 70 The thread tension is incorrect. Adjust the tension of the upper thread. page 64 If the embroidery unit carriage or 3 Embroidery not neatly done. Objects are placed near the carriage or embroidery frame. embroidery frame bumps into objects, the pattern will be misaligned. Do not place objects within the range of embroidery frame motion. page 16 Stretch the fabric on the frame once Material coming out of the again so that the material coming out embroidery frame is causing of the embroidery frame does not - problems. cause problems, rotate the pattern and embroider. When embroidering on a heavy fabric, the fabric is hanging off the table. If embroidery is done with the fabric hanging off the table, the embroidery unit movement will be impaired. Support the fabric while embroidering. - The fabric is catching. It is pinched. Stop the machine and set up the fabric correctly. - The carriage was moved while the If the carriage is moved during the embroidery frame was being removed or attached during process, the pattern may be misaligned. Be careful when removing or - embroidery. attaching the embroidery frame. Troubleshooting 77