Brother International SB7900E Operation Manual - Page 60
otherwise the needle may break,
View all Brother International SB7900E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
EMBROIDERY Lower the presser foot lever. c 1 a Presser foot lever Press d (Start/stop button). Press (Start/stop button) again. g X The embroidery starts again and stops automatically with reinforcement after one color has been completed. When automatic thread cutting is set, the thread is cut. Press h (Thread cutter button) once. 1 1 a Start/stop button After progressing 5-6 stitches, press e stop button) to stop the machine. (Start/ Use scissors to cut the thread at the beginning f of the stitching. Cut the thread at the edge of the stitching. a Thread cutter button X The needle is raised and the threads are cut. CAUTION ● Do not press (Thread cutter button) after threads have already been cut, otherwise the needle may break, the threads may become tangled or damage to the machine may occur. ● Do not press (Thread cutter button) if there is no fabric under the embroidery foot or while the machine is embroidering, otherwise damage to the machine may occur. • If the thread is left at the beginning of the stitching, it may be sewn over as you continue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the thread at the beginning. Set up embroidery thread for the next color, i and repeat steps a through h. Cut the excess thread. j X When the last color is embroidered, "Finished sewing." will appear on the display. Press , and the display will return to the initial screen. Memo z For the automatic cutting setting, refer to "LCD (liquid crystal display) operation" (page 50). 58