Brother International TD-2020 Users Guide - Page 106
Firewall/AntiVirus, Standard Installation
View all Brother International TD-2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Chapter 11 c Use the slider to enable the WLAN interface. d Make sure that the network cable is not connected to the printer, and then turn on the printer. e Hold down (at least 5 seconds) the (Feed) button until the STATUS indicator blinks in green. f Press the WPS button on your WLAN access point/router. When the configuration is complete, the STATUS indicator on the printer lights in green. Wireless setup is now complete. Go to step g to install the printer driver and software. g Insert the installer CD-ROM into your CD-ROM drive. If the language screen appears, choose your language. NOTE • For Windows® XP/Windows Vista®/Windows® 7: If the installer screen does not automatically appear, display the contents of the CD-ROM drive folder, and then double-click [start.exe]. • For Windows® 8: If the installer screen does not automatically appear, click [Run start.exe] in the [Start] screen, or display the contents of the CD-ROM drive folder from the desktop, and then double-click [start.exe]. h Click [Standard Installation]. i Read the license agreement, and click [Agree] if you agree with the terms and conditions. j Click [Install] to start the installation, and then follow the on-screen instructions. k When the following screen appears, select [Wireless Network Connection], and then click [Next]. l When the [Firewall/AntiVirus detected] screen appears, select [Change the Firewall port settings to enable network connection and continue with the installation. (Recommended)], and then click [Next]. If you are not using the Windows® Firewall, allow access using UDP ports 137 and 161. m Follow the on-screen instructions to check that the printer is in wireless LAN mode. 100