Brother International TD-2020 Users Guide - Page 111
Using Bluetooth to Communicate When Printing, Product Specifications
![]() |
View all Brother International TD-2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Using the Bluetooth Interface (Optional:PA-BI-001) (TD-2120N/2130N only) Using Bluetooth to Communicate When Printing 12 This printer will not be able to print using Bluetooth immediately after it has been enabled. You must first follow the procedure below to allow the printer to communicate with your computer. Once a connection has been established, the printer remains connected until it is turned off, preventing it from being discovered by any other computer. a Check that the Bluetooth interface (optional) is correctly attached to the printer, and then use the slider to enable the Bluetooth interface. b Press the (Power) button to turn on the printer. c Hold down (about 5 seconds) the (Feed) button until the STATUS indicator blinks in green. d If the printer was automatically turned off, turn it on again. e Check that the STATUS indicator is lights in green. The printer has entered Bluetooth mode. If the STATUS indicator turns off, the printer has failed to enter the Bluetooth mode. Repeat the procedure from step c. f Use the Bluetooth management software to discover the printer. Bluetooth communication starts. Product Specifications 12 Size: Approximately 4.34" (W) 3.19" (D) 1.03" (H) (110 mm (W) 81 mm (D) 26 mm (H)) Weight: 0.11 lb (0.048 kg) 12 105
![](/manual_guide/products/brother-international-td2020-users-guide-b17f7b3/111.png)