Brother International TD-2020 Users Guide - Page 110
Using the Bluetooth Interface (Optional:PA-BI-001) (TD-2120N/2130N only)
View all Brother International TD-2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
12 Using the Bluetooth Interface (Optional:PA-BI-001) (TD-2120N/2130N only) 12 Connecting the Computer and Printer by Bluetooth 12 NOTE • Follow the recommendations of the manufacturer of your Bluetooth-equipped computer or Bluetooth adapter and install any necessary hardware and software. • When connecting via Bluetooth, the connection settings are saved even after the printer is turned off. Use this procedure to pair the printer with the computer using the Bluetooth management software. In order to use a Bluetooth connection, the Bluetooth interface (optional) must be attached to the printer. For details on attaching the Bluetooth interface (optional), see its instruction manual. a Check that the Bluetooth interface (optional) is correctly attached to the printer, and then use the slider to enable the Bluetooth interface. b Press the (Power) button to turn on the printer. c Hold down (about 5 seconds) the (Feed) button until the STATUS indicator blinks in green. d If the printer was automatically turned off, turn it on again. e Check that the STATUS indicator is lights in green. The printer has entered Bluetooth mode. If the STATUS indicator turns off, the printer has failed to enter the Bluetooth mode. Repeat the procedure from step c. f Use your Bluetooth management software to discover the printer and configure the printer connection. NOTE If the software prompts you to enter a Bluetooth passkey (PIN code), type in the passkey assigned to the printer. By default, the printer's passkey is the last four digits of its serial number. g Note the name of the port used for the connection. (Virtual COM ports such as "COM1" or "COM3" will be used.) h Insert the installer CD-ROM into your CD-ROM drive. i Double-click the CD-ROM drive, and then double-click [BluetoothSetup.exe]. Follow the onscreen instructions to configure the settings. j When the screen for specifying the port name appears, specify the port name noted in step g. NOTE Refer to your Bluetooth management software's documentation for details on connection settings, confirming the port name, etc. 104