Brother International TN-875A Instruction Manual - English and Spanish - Page 2

Safety Instructions, Caution

Page 2 highlights

Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions below and the explanations given in the instruction manual. With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts such as the needle and thread take-up lever, and consequently there is always a danger of injury that can be caused by these parts. Follow the instructions from training personnel and instructors regarding safe and correct operation before operating the machine so that you will know how to use it correctly. SAFETY INSTRUCTIONS z Safety indications and their meanings This instruction manual and the indications and symbols that are used on the machine itself are provided in order to ensure safe operation of this machine and to prevent accidents and injury to yourself or other people. The meanings of these indications and symbols are given below. Indications CAUTION The instructions which follow this term indicate situations where failure to follow the instructions could cause injury when using the machine or physical damage to equipment and surroundings. Symbols This symbol ( ) indicates something that you should be careful of. The picture inside the triangle indicates the nature of the caution that must be taken. (For example, the symbol at left means "beware of injury".) This symbol ( ) indicates something that you must not do. This symbol ( ) indicates something that you must do. The picture inside the circle indicates the nature of the thing that must be done. (For example, the symbol at left means "you must make the ground connection".) x Notes on safety CAUTION Installation ¡ Machine installation should only be carried out by a qualified technician. ¡ Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. ¡ All cords should be secured at least 25 mm away from any moving parts. Furthermore, do not excessively bend the cords or secure them too firmly with staples, otherwise there is the danger that fire or electric shocks could occur. ¡ The sewing machine weighs more than 46 kg. The installation should be carried out by two or more people. ¡ Install the belt covers to the machine head and motor. ¡ Do not connect the power cord until installation is complete, otherwise the machine may operate if the treadle is pressed by mistake, which could result in injury. ¡ Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a serious electric shock. ¡ Be sure to wear protective goggles and gloves when handling the lubricating oil, so that no oil gets into your eyes or onto your skin, otherwise inflammation can result. Furthermore, do not drink the oil under any circumstances, as it can cause vomiting and diarrhoea. Keep the oil out of the reach of children. - i - TN-8400, 8700 (English) TL-8400 (English)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98

– i –
Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please
read the safety instructions below and the explanations given in the instruction manual.
With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving
parts such as the needle and thread take-up lever, and consequently there is always a danger of injury that
can be caused by these parts. Follow the instructions from training personnel and instructors regarding
safe and correct operation before operating the machine so that you will know how to use it correctly.
SAFETY INSTRUCTIONS
z
Safety indications and their meanings
This instruction manual and the indications and symbols that are used on the machine itself are provided
in order to ensure safe operation of this machine and to prevent accidents and injury to yourself or other
people.
The meanings of these indications and symbols are given below.
Indications
The instructions which follow this term indicate situations where failure to
follow the instructions could cause injury when using the machine or physi-
cal damage to equipment and surroundings.
Symbols
................
This symbol (
) indicates something that you should be careful of. The picture in-
side the triangle indicates the nature of the caution that must be taken.
(For example, the symbol at left means “beware of injury”.)
................
This symbol (
) indicates something that you
must not do.
................
This symbol (
) indicates something that you
must do. The picture inside the circle
indicates the nature of the thing that must be done.
(For example, the symbol at left means “you must make the ground connection”.)
x
Notes on safety
Installation
TN-8400, 8700 (English)
TL-8400 (English)
CAUTION
CAUTION
¡
Machine installation should only be car-
ried out by a qualified technician.
¡
Contact your Brother dealer or a quali-
fied electrician for any electrical work
that may need to be done.
¡
The sewing machine weighs more than
46 kg. The installation should be carried
out by two or more people.
¡
Do not connect the power cord until in-
stallation is complete, otherwise the ma-
chine may operate if the treadle is
pressed by mistake, which could result
in injury.
¡
Be sure to connect the ground. If the
ground connection is not secure, you run
the risk of receiving a serious electric
shock.
¡
All cords should be secured at least 25
mm away from any moving parts. Fur-
thermore, do not excessively bend the
cords or secure them too firmly with
staples, otherwise there is the danger
that fire or electric shocks could occur.
¡
Install the belt covers to the machine
head and motor.
¡
Be sure to wear protective goggles and
gloves when handling the lubricating oil,
so that no oil gets into your eyes or onto
your skin, otherwise inflammation can
result.
Furthermore, do not drink the oil under
any circumstances, as it can cause vom-
iting and diarrhoea.
Keep the oil out of the reach of children.