Brother International ULT-2003D Users Manual - English - Page 120
Tape or Elastic Attaching, and pull up the bobbin thread, grasping the top and bob
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
CONTENTS Tape or Elastic Attaching 1. Select a straight stitch pattern, and attach presser foot "J". Set the stitch length to 4.0 mm, and loosen the upper thread tension to 2.0. Note Be sure that neither the automatic reinforcement nor the automatic thread cutting is selected. 1 - 2 - 3 - 4 - 5 - 6 - 7 - 2. Sew 2 rows of straight stitches on the right side of the fabric, then pull the bobbin thread to gain the necessary gather. Note Before sewing the straight stitch, rotate the balance wheel and pull up the bobbin thread, grasping the top and bobbin thread pull a length of thread out from the rear of the machine. (Be sure that the presser foot is lifted). 8 - 9 - ?! 3. Place the tape over the gather, and hold it in place with basting pins. 1 Tape 1 Index Sewing Utility Stitches 3-47