Brother International ULT-2003D Users Manual - English - Page 54

CONTENTS 1 2 5 6 5. With the presser foot lever raised, tighten the screw lightly to attach the presser foot holder. 6. Place the presser foot "J" under the holder. Lower the presser foot lever and use the screwdriver to tighten the screw firmly. Note If the presser foot holder is not installed correctly, the thread tension may loosen due to improper presser foot holder height. CAUTION • Be careful not to touch the needle during this time, otherwise injury may result. • Use the screwdriver to tighten the presser foot holder screw securely. If the screw is loose, the needle may strike the presser foot and cause injury. 1 - 2 - 3 - 4 - 5 - Changing the Needle CAUTION • Turn the main power switch to OFF before changing the needle. If the main power is left on and the Start/Stop button or another operation button is pressed accidentally, the machine will start and injury may result. • Use only sewing machine needles for home use. Other needles may bend or break and cause injury. • Never sew with a bent needle. A bent needle will easily break and cause injury. 6 - 7 - To Check the Needle Correctly: To check the needle, place the flat side of the needle on a flat surface. Check the needle from the top and the sides. Throw away any bent needles. 1 Parallel space 2 Level surface (bobbin cover, glass, etc.) 1 2 8 - 9 - ?! * Place a level surface under the needle Index Setting Up 1-43