Brother International ULT-2003D Users Manual - English - Page 72
Using the Automatic Thread Cutter, Start/Stop
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
CONTENTS Using the Automatic Thread Cutter After selecting a stitch pattern, turn on the automatic thread cutting function before sewing, and the machine will automatically sew reinforcement stitches (or reverse stitches, depending on the stitch pattern) at the beginning and end of sewing, and trim the threads at the end of sewing. This function is useful when sewing buttonholes and bar tacks. 1. Select a stitch pattern. 2. Press to set the automatic thread cutting func- tion. The key will display as . Note This function is set automatically when sewing embroidery. 5 1 6 3. Set the fabric in the start position and start sewing. The machine will automatically sew reverse stitches (or reinforcement stitches) and then continue sewing. 1 Reverse stitches (or reinforcement stitches) Note If you use the "Start/Stop" button to pause sewing, press the same button again to continue. The beginning reverse/ reinforcement stitches will not be sewn again. 5 6 1 4. Press the "Reverse/Reinforcement Stitching" button. The machine will sew reverse stitches (or reinforcement stitches), then trim the thread. To turn off the automatic thread cutting function, press the again, so it appears as . 1 Sews reverse stitches (or reinforcement stitches) and automatically trims the thread. 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - ?! Index Getting Ready to Sew 2-15