Brother International ULT-2003D Users Manual - English - Page 98
Overcasting Using the Side Cutter, Needle Position
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
CONTENTS I Overcasting Using the Side Cutter By using the side cutter, you can do overcasting while cutting the fabrics. 1. Push the "Needle Position" button to raise the needle, then turn off the power. 1 2. Raise the presser foot lever. 1 - 2 - 2 3 - 3. Press the black button on the presser foot holder, and remove the presser foot. 4 - 5 - 5 4. Set the fork of the operating lever around the needle clamp screw. 6 - 1 Needle clamp screw 2 1 2 Operating lever * Make sure that the fork of the operating lever is set onto the screw firmly. 7 - 8 - 9 - ?! Index Sewing Utility Stitches 3-25
Sewing Utility Stitches
3-25
1
—
2
—
3
—
4
—
5
—
6
—
7
—
8
—
?
!
9
—
CONTENTS
Index
5
1
2
1
2
■
Overcasting Using the Side Cutter
By using the side cutter, you can do overcasting while cutting the fabrics.
1.
Push the
“
Needle Position
”
button to raise the needle,
then turn off the power.
2.
Raise the presser foot lever.
3.
Press the black button on the presser foot holder, and
remove the presser foot.
4.
Set the fork of the operating lever around the needle
clamp screw.
1
Needle clamp screw
2
Operating lever
*
Make sure that the fork of the operating lever is set
onto the screw firmly.