Brother International ULT-2003D Users Manual - English - Page 31

Using the Machine Settings Key CONTENTS Press to change the default machine settings (needle stop position, embroidery speed, opening display, etc.) Note This function will be available in future technology upgrades. 1 Select the needle stop position (the needle position when the machine is not operating) to be up or down. 1 2 Select whether to use the sewing speed control- ler to determine the zigzag width (see page 3- 2 34). 3 Make adjustments to character or decorative stitch patterns (see page 4-12). 3 4 Select from among 10 displays when using the Embroidery functions (see page 5-45). 5 Change the thread color display on the embroi- dery screen; display the thread number, color 4 name, time to embroider, or one of the two cus- tom thread color numbering sets (see page 5-42). 5 6 When embroidery data containing custom thread 6 colors specified with the PE-Design Ver. 5.0 is 7 saved on a floppy disk, the stored custom thread colors are read as those from the sewing machine 8 if "ON" is selected for this setting. 7 Adjust the maximum embroidery speed setting (see page 5-41). 8 Program version display Note Version 3.0, this is the installed software version for your machine. Check with your local authorized Brother dealer or at www.brother.com for notification of an available updates. 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 1 Press to go to the next screen. 2 1 Change the brightness of the LCD (see page 1- 3 16). 4 2 Turn the buzzer ON or OFF. 9 - ?! 5 3 Turn the lamp ON or OFF. 6 4 Turn the opening screen display ON or OFF. 5 Turn application checking ON or OFF (see page 1-19). 7 6 Turn the display of each embroidery color ON or OFF (see page 5-19). 7 Change the display language (see page 1-18). Index 1-20 Setting Up