Brother International ULT-2003D Users Manual - English - Page 180
Attaching the Embroidery Unit, If there is a gap, the em
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
CONTENTS Attaching the Embroidery Unit CAUTION Be sure to turn off the power before installing the embroidery unit, otherwise, the machine may be damaged. 1. Turn off the power, and remove the flat-bed attachment. 1 - 2 - 2. Open the cover of the connection port, as shown in the illustration. Note Be sure to replace the cover when the embroidery unit is not installed. 3 - 4 - 12 3. Insert the embroidery unit connection into the machine connection port. Push lightly until the unit clicks into place. 1 Embroidery unit connection 2 Machine connection port CAUTION • Be sure there is no gap between the embroidery unit and the sewing machine. If there is a gap, the embroidery patterns will not embroider with the correct registration. • Do not push on the carriage when installing the embroidery unit onto machine. Moving the carriage may damage the embroidery unit. 4. Turn on the main power switch. The screen at left will display. 5 - 6 - 7 - 8 - 9 - ?! Index Embroidery 5-5