Brother International XL-3025 Users Manual - English - Page 53
Zipper, Insertion
View all Brother International XL-3025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
USING ATTACHMENTS AND APPLICATIONS USO OE ACCESORIOS Y APLICACIONES Zipper Insertion Pattern 3 Stitch Length 2-3 Fool Zipper Foot The zipper foot is used to sew various types of zippers and can easily be positioned to the right or left side of the needle. When sewing the right side of the zipper, attach the shank to the left pin of the zipper foot. When sewing the left sideof the zipper,attach the shank to the right pin of the zipper foot. See fig. A. 1. Set the Pattern Selection Dial to 3. Set the Stitch Length between 2 and 3. 2. Lower the presser foot lever and fix either the left or right pin of the zipper foot onto the shank. 3. Fold the edgeof thematerial2cm(3/4")andplace the zipper under the folded portion. 4. Lower the needle into the notch located either on the left or right side of the zipper foot. 5. Sew from the bottom of the zipper toward the top on both sides. The needle should be positioned on the zipper side of the foot for best results. See fig. B. 6. To sew the opposite side of the zipper, release the foot by pressing the button located at the back of the presser foot, install the zipper toot on the other side of the zipper and continue sewing using the other side notch. 0; Zipper foot (?) Right pin for sewing the left side of the zipper (J) Left pin for sewing the right side of the zipper A 2 Insercion de cremalleras Puntado 3 Largo de punlada Prensatelas 2-3 Pata de crematleraS La pats de cremalleras sinAapare coser varies tipos de cremalleras y puede colocarse facilmente hacia la izquierda o derecha de la aguja. Cuando la cremallera se case par el lado derecho, instatelapaledeslizandolahacia laizquierda. Cuando se case la cremallera porelladoizquierdo, instalela pate deslizandola hacia la derecha, tal comp lo muestra la fig. A. 1. Ponga el selector do punladas en 3. Ajuste el largo de puntada entre 2 y 3. 2. Baje la palanca delprensatelas y coloque el eje izquierdo o derecho de la pate de cremalleras en la ante. a Doble la meta del tejido a 2 cm (3/4" y coloque la cremallera debajo de la pane doblada. 4. Baja laagujaenlahendidurasituadaalaizquierda 0 derecha de la pate de cremalleras. 5. Cuesa a partirde la parte inferior de la cremallera hacia la pane superior, por ambos lades. Para mejores resullados, se debe colocarla aguja del lado de la pate y de to cremallera. Vaasa fig. B para mayores (Mattes. 6. Para coser el lado opuesto de la cremallera, simile la pate a! °prefer el baton situado en su parte posterior, instate la pats en el otro /ado de la cremallera y sign cosiendo, pasando la aguja par fa hondidura del otro lado. O Pala de trarnalloras (2) Ejederechopato coserlaparteizquiorda de la cremallera • EjoizquicMoparecoserlapanederecha do la cremeWm. O 3 • • 48