Brother International XR9550 Operation Manual - Page 12
Sewing speed controller for, models equipped with the start, stop button, Changing the needle stop
View all Brother International XR9550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
KNOWING YOUR SEWING MACHINE CAUTION • When connecting the foot controller, be sure to turn off the sewing machine in order to prevent the machine from accidentally being started. Depress the foot controller to start sewing, and adjust the sewing speed by changing the pressing force. Changing the needle stop position Normally, the sewing machine is set to leave the needle in the fabric when sewing is stopped. Instead, the machine can be set to leave the needle raised when sewing is stopped. 1 Turn off the sewing machine. 2 Holding the "-" side of (1) pressed, turn on the sewing machine. Slower Faster You should make sure that nothing is placed on the foot controller when the machine is not in use. CAUTION • Do not allow pieces of cloth and dust to build up on the foot controller. Doing so could cause a fire or an electric shock. Note • When the foot controller is plugged in, the start/ stop button cannot be used to start sewing (only for models equipped with the start/stop button). Sewing speed controller (for models equipped with the start/ stop button) 1 Slide the sewing speed controller to select the desired sewing speed. Slower Faster 1 Sewing speed controller • The speed set using the sewing speed controller is the foot controller's maximum sewing speed. 10 3 After the sewing machine has turned on, release the "-" side of (1). XX The needle stop position changes to the raised position. Memo • Perform the same operation to change the needle stop position to the lowered position. Changing the initial needle position Normally, the straight stitch (left needle position) is automatically selected when the sewing machine is turned on. The initial needle position can be changed to the straight stitch (center needle position). 1 Turn off the sewing machine. 2 Holding the "+" side of (2) pressed, turn on the sewing machine. 3 After the sewing machine has turned on, release the "+" side of (2). XX The initial needle position changes to the center needle position. Memo • The specified initial needle position is maintained after the machine is turned off. • Perform the same operation to change the initial needle position to the left needle position.