Campbell Scientific WINDSONIC1 WINDSONIC 2-D Sonic Wind Sensors - Page 6

Table of Contents 7.5 Changing the SDI-12 Address Using LoggerNet and a Datalogger .. 22 7.5.1 Array-Based Edlog Dataloggers 22 7.5.2 Table-Based Edlog Dataloggers 24 7.5.3 CR200(X)-series Datalogger 25 8. Maintenance 26 9. Diagnostic Codes 27 10. Siting References 28 Appendices A. WindSonic Orientation A-1 A.1 Determining True North and Sensor Orientation A-1 A.2 Online Magnetic Declination Calculator A-3 B. Updating an Older Program for Measuring a WindSonic1 With the New Settings B-1 Figures 4-1. WindSonic mounted on a CM202 using pn 17837 3 6-1. White dot indicating that the WindSonic1 has the newer settings..... 10 7-1. SDI-12 Transparent Mode on an Edlog array-based datalogger (CR10X) using control port 8 and changing the SDI-12 address from 0 to 1 23 7-2. SDI-12 Transparent Mode on an Edlog table-based datalogger using control port 8 and changing the SDI-12 address from 0 to 1 25 7-3. SDI-12 Transparent Mode on a CRBasic CR200(X)-series datalogger using control port C1/SDI12 and changing the SDI-12 address from 0 to 1 26 A-1. Magnetic declination for the conterminous United States (2004) ... A-1 A-2. A declination angle east of True North (positive) is subtracted from 360 (0) degrees to find True North A-2 A-3. A declination angle west of True North (negative) is subtracted from 0 (360) degrees to find True North A-2 A-4. NOAA web calculator A-3 Tables 7-1. WindSonic1 Output Frequencies 10 7-2. WindSonic1 to Datalogger Connections 11 7-3. WindSonic1 to SDM-SIO1 Connections 11 7-4. WindSonic4 to Datalogger Connections 12 7-5. CRBasic Datalogger Operating Systems that Support RS-232 Communications and SerialInRecord 13 7-6. Wiring for CR1000 Example Program 13 7-7. Wiring for CR1000/SDM-SIO1 Program Example 14 ii