Canon 2812B004 VB-C60 Operation Guide

Canon 2812B004 - VB C60 CCTV Camera Manual

Get Canon 2812B004 - VB C60 CCTV Camera PDF manuals and user guides
UPC - 013803099478
View all Canon 2812B004 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon 2812B004 manual content summary:

  • Canon 2812B004 | VB-C60 Operation Guide - Page 1
    /&5803,$".&3" 0QFSBUJPO(VJEF #FGPSFVTJOHUIFQSPEVDU CFTVSFUPSFBEUIF4UBSU(VJEFBOEUIJT0QFSBUJPO(VJEF
  • Canon 2812B004 | VB-C60 Operation Guide - Page 2
    Introduction Thank you for purchasing Canon Network Camera VB-C60/VB-C60B (hereafter referred to as VB-C60). The only difference between VB-C60 and VB-C60B is the body color. This Operation Guide describes how to set up and use VB-C60. Read this guide carefully before using VB-C60 to ensure that you
  • Canon 2812B004 | VB-C60 Operation Guide - Page 3
    of Canon Inc. ●Microsoft Windows and Microsoft Internet Explorer are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. ●Windows is legally recognized as the Microsoft Windows Operating System. ●Other brands or product names in this guide are
  • Canon 2812B004 | VB-C60 Operation Guide - Page 4
    provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard." Third Party's Software The product (network camera and bundled VK-Lite viewer) contains third party's software modules. For detail information, please refer to ReadMe-E.txt on the supplied CD-ROM
  • Canon 2812B004 | VB-C60 Operation Guide - Page 5
    Contents Introduction ...ii Contents ...v How to Read the Guides viii User's Manual ...viii Icons using in this Guide ix Camera's Top Page x Access Camera's Top Page x Access the Setting Menu xi Access the Sample Pages xi Access the VB-C60 Viewer xii User Authentication for Accessing the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 6
    36 View Logs ...2-37 Chapter 3 VB-C60 Viewer VB-C60 Viewer Overview 3-2 Major Differences between Admin Viewer and VB Viewer 3-2 User Authority and Camera Control Privilege 3-3 Starting VB-C60 Viewer 3-5 Start up VB-C60 Viewer 3-5 Close VB-C60 Viewer 3-6 Connect from the VBAdmin Tools
  • Canon 2812B004 | VB-C60 Operation Guide - Page 7
    Mobile Phone 4-11 Overwrite Sample Pages 4-12 Chapter 5 Appendix Modifiers ...5-2 Troubleshooting 5-4 Log Message List 5-6 VB-C60 Log Messages 5-6 VB-C60 Viewer Message Menu Using a Web Browser ...5-14 Initialize the Camera using the Reset Switch 5-15 List of Factory Default Settings 5-16 Index
  • Canon 2812B004 | VB-C60 Operation Guide - Page 8
    to use VBAdmin Tools and VB-C60 Viewer, and troubleshooting tips. The Operation Guide is contained in the Setup CD-ROM. The Setup CD-ROM also contains "VK-Lite", a simplified version of the Network Video Recorder (→dStart Guide P.1-6). The instruction manuals below are provided for VK-Lite. Setup
  • Canon 2812B004 | VB-C60 Operation Guide - Page 9
    Following icons are used to draw reader's attention to particularly important text in this guide. Icon Explanation Important information that must be observed or actions that are prohibited during the operation. Users are recommended Tip to read these memos. d Please refer to Start Guide. ix
  • Canon 2812B004 | VB-C60 Operation Guide - Page 10
    VB-C60 viewer for displaying video or the setting page for detailed settings of the camera. When you access VB-C60 for the first time, please refer to the Start Guide comes with VB-C60. In this guide, the IP address "192.168.100.1" (factory default setting) is used to explain Note how
  • Canon 2812B004 | VB-C60 Operation Guide - Page 11
    Camera's Top Page Access the Setting Menu Click 2 Setting Page to move to the setting page for detailed settings. For details on the Settings Menu, see
  • Canon 2812B004 | VB-C60 Operation Guide - Page 12
    Camera's Top Page Access the VB-C60 Viewer Click the "Admin Viewer" or "VB Viewer" link under 4 "VB-C60 Viewer" to access the VB-C60 viewer. Admin Viewer VB Viewer xii
  • Canon 2812B004 | VB-C60 Operation Guide - Page 13
    again with the correct name and password. ● Be sure to change the Administrator password for system security. Do not forget the new password. ● If you forgot the Administrator password, press the camera's reset switch to restore the factory default setting (➞ P.5-15). However, note that all settings
  • Canon 2812B004 | VB-C60 Operation Guide - Page 14
  • Canon 2812B004 | VB-C60 Operation Guide - Page 15
    Chapter Detailed Settings This chapter describes the detailed settings for VB-C60 such as network connection, camera control, date, time and access control.
  • Canon 2812B004 | VB-C60 Operation Guide - Page 16
    Setting Menu You can move to each setting page from Setting Menu for following various camera settings. For details, refer to each page of this manual. ● Setting Menu ● Network Settings for the administrator password, LAN, IPv6, DNS and SNMP (➞ P.1-7) ● Date and Time Settings for the date, time and
  • Canon 2812B004 | VB-C60 Operation Guide - Page 17
    log and current settings, rebooting the camera, and restoring the factory default settings (➞ P.1-44) Windows Vista/XP Note ● If the "Windows Security Alert" dialog box appears, click " " in the "Maintenance" page, follow the instructions of the information bar to disable the pop-up blocker. 1-3
  • Canon 2812B004 | VB-C60 Operation Guide - Page 18
    setting, first you need to access to the camera via a web browser. To begin with, access to the camera's top page (➞ P.x). For details of entering . 3 11222 11122 1 to Top button Click this button to move to the camera's top page. 2 Open Viewer button Click this button to open the Admin viewer
  • Canon 2812B004 | VB-C60 Operation Guide - Page 19
    top right of the setting page changes to "OK and Reboot". Click "OK and Reboot" to enable the change. The setting changes and then the camera reboots. Click "Clear" to reset the changes. ● A dialog box appears to alert when clicking "OK" or "OK and Reboot" after changing Tip the network setting
  • Canon 2812B004 | VB-C60 Operation Guide - Page 20
    " on the top right of each setting page to return to the Setting Menu. ● Do not open multiple setting pages when changing settings for a single camera Note settings. ● Do not use "Back" and "Forward" of the web browser to move between the setting pages. The old page is displayed due to
  • Canon 2812B004 | VB-C60 Operation Guide - Page 21
    is "VB-C60". Be sure to disconnect the Admin viewer or VBAdmin Tools from the camera before changing the password. 2 Confirm Password Enter the same password as above for confirmation. ● For system security, make sure to change the administrator password, and not to Note forget the new password
  • Canon 2812B004 | VB-C60 Operation Guide - Page 22
    4 5 2 62222222222 1 IP Address Setting Select "Auto (DHCP)" or "Manual" as IP address setting method. If you select "Auto (DHCP)", values may not be able to access the camera via the network. In this case, use the VB Initial Setting Tool v4.0 (➞d Start Guide P.2-9) to configure the address settings
  • Canon 2812B004 | VB-C60 Operation Guide - Page 23
    the host name in the DNS server in advance. For more information on DNS server settings, contact your system administrator. ● If Name Server Address 1 is not available, the camera automatically will access Name Server Address 2. However, Name Server Address 2 must be registered in advance. 1-9
  • Canon 2812B004 | VB-C60 Operation Guide - Page 24
    1 SNMP Select from "Disable" and "Enable". Specify "Enable" if you need to reference camera's information from the SNMP manager. 2 Community Name Enter the SNMP community name. For security reason, it is recommended to change the default community name. 3 Administrator Contact Information Enter the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 25
    for the date, time and time zone. ▼Current Date and Time Date, Time The date and time set on the camera are displayed. ▼Setting 111111123222222 1 Setting Method Select from "Set Manually", "Synchronize with NTP server", "Synchronize with NTP broadcast" and "Synchronize with computer time". 1-11
  • Canon 2812B004 | VB-C60 Operation Guide - Page 26
    manually Manually enter the date and time in "Year/Month/Day" format for the date and in "hh:mm:ss" format for the time. Use 2 digits of the computer currently accessing the camera. The time zone is also "Set manually". ● When "Synchronize with NTP server" is selected, if the camera cannot
  • Canon 2812B004 | VB-C60 Operation Guide - Page 27
    Detailed Settings Set the Camera Control and External Device Names (Camera) You can configure following settings. ● Camera Name Enter the camera name. The name is required when using VK-64 with the camera. ● Camera Control Setting for the AF mode, shutter speed, focus, digital zoom and Image
  • Canon 2812B004 | VB-C60 Operation Guide - Page 28
    automatically obtain correct focus. Normally, select "Auto". Fixed at infinity The focus is fixed at a point of infinity. ● When monitoring subjects through a glass window, the camera may focus on the glass Note surface if there is dust or drop of water on it. So, in such situation, be sure to place
  • Canon 2812B004 | VB-C60 Operation Guide - Page 29
    glass Quickly moving subjects Night views or dark places Far and near subjects in the same frame ● The focusing range (approx) differs obtain correct focus, e.g. night scene. ▼Camera Contro1111l1 22222 1 Digital Zoom Select whether or not to use the digital zoom from "Disable" or "Enable".
  • Canon 2812B004 | VB-C60 Operation Guide - Page 30
    is being activated. ▼Day/Night 111111 2 322222 1 Mode Select the switching mode from "Manual" and "Auto". When specifying "Auto", you can set "Switching Brightness" and "Response" according to the environment where the camera is installed or the switching condition. * If you are using an infrared
  • Canon 2812B004 | VB-C60 Operation Guide - Page 31
    using "Day/Night" in the "Auto" mode, "AE Mode" should be set to "Auto" or Flickerless" (➞ P.3-25). ● When using the camera with IR light, "Day/Night" should be set to "Manual". IR light cannot be used in the "Auto" mode. ● While using "Day/Night" in the "Auto" mode, the IR cut filter
  • Canon 2812B004 | VB-C60 Operation Guide - Page 32
    automatically changes its direction to the home position. Before using this function, you need to set the camera's home position using VBAdmin Tool (➞ P.2-18). ▼External Input Device 1 - 2/External Output Device 1 - 2 External Input Device/External Output Device - Device Name To distinguish between
  • Canon 2812B004 | VB-C60 Operation Guide - Page 33
    Set the Image Size, Quality and Frame Rate (Image) Detailed Settings You can configure following settings. ● JPEG Configure the image quality, size and maximum frame rate for JPEG images. ● MPEG-4 Configure the image quality, size and capture frame rate for MPEG-4 video. ▼JPEG 1122 1111112322222
  • Canon 2812B004 | VB-C60 Operation Guide - Page 34
    Set the Image Size, Quality and Frame Rate (Image) ● Higher image size or quality results in a larger data size per frame and a heavier Note network load. JPEG : The frame rate may decrease. MPEG-4 : Video may be interrupted temporarily. ● The data volume may become large according to the type or
  • Canon 2812B004 | VB-C60 Operation Guide - Page 35
    Set HTTP Upload, FTP Upload and E-mail Notification (Upload) Detailed Settings You can configure following settings. ● General Upload Setting for upload operations. ● HTTP Upload Setting for HTTP upload. ● FTP Upload Setting for FTP upload. ● E-mail Notification Setting for e-mail notification of
  • Canon 2812B004 | VB-C60 Operation Guide - Page 36
    Set HTTP Upload, FTP Upload and E-mail Notification (Upload) - Set "Disable" for either of "ON Event Operation" or "OFF Event Operation", when "External Device Input Event" is set to "Enable" (➞ P. 1-32). - Select a longer interval for "Interval of the Timer", when "Interval Timer Event" is set to "
  • Canon 2812B004 | VB-C60 Operation Guide - Page 37
    Upload and E-mail Notification (Upload) Enter "Proxy Server", "Proxy Port", "Proxy User Name" and "Proxy Password" when Note connecting to the camera via a proxy server. ▼FTP Upload 1111122222 111111113564722222222 1 Notification The information to be notified is set to "Image data upload with FTP
  • Canon 2812B004 | VB-C60 Operation Guide - Page 38
    Set HTTP Upload, FTP Upload and E-mail Notification (Upload) Maximum Number of Loops Enter the maximum number of loops between 0 and 9999 when "File Naming" is set to "Loop". Subdirectory Name to Create, File Name to Create Enter a subdirectory name and file name to create (up to 127 characters)
  • Canon 2812B004 | VB-C60 Operation Guide - Page 39
    Detailed Settings Set HTTP Upload, FTP Upload and E-mail Notification (Upload) 6 Authentication Select the mail authentication method from "None", "POP before SMTP" and "SMTP-AUTH", according to the authentication method of the destination SMTP server. User Name, Password, POP Server When the mail
  • Canon 2812B004 | VB-C60 Operation Guide - Page 40
    Setting for the HTTP port and Web page distribution. ▼Image Server 1111111324222222 1 Maximum Number of Clients Set the maximum number of clients, to which the camera can simultaneously distribute video. You can set up to 30 clients. When 0 is specified, only the Admin viewer can connect to the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 41
    Audio Reception from Viewer Specify "Enable" for outputting audio from optional VK viewers or bundled VK-Lite viewer through speakers connected with the camera. 5 Output Volume Set the volume on the speakers, between 1 and 100. The higher the value, the louder the speaker's volume. 6 Echo Canceller
  • Canon 2812B004 | VB-C60 Operation Guide - Page 42
    to send audio via VB-C60's audio output terminal. It cannot be sent from the VB-C60 viewer (➞d Start Guide P.1-8). ● Use a speaker with amprifier to connect to the camera (➞d Start Guide P.3-7). ● When "Echo Canceller" is set to "Enable", audio quality and volume may be affected. Use this function
  • Canon 2812B004 | VB-C60 Operation Guide - Page 43
    Setting for audio files to be registered. ▼Image Buffer 1111113 1 2222222 1 Frame Rate Set the frame rate used when temporarily buffering images in the camera. 2 Pre-event Buffer (number of image frames) Set the number of images to be buffered, which were captured prior to each event. 3 Post
  • Canon 2812B004 | VB-C60 Operation Guide - Page 44
    and the "HTTP Upload" or the "FTP Upload" submenu in "Upload". 6 E-mail Notification Specify "Enable" to send an e-mail notification when the camera detects motion. To use this function, you also need to configure settings of the "E-mail Notification" submenu in "Upload". 7 Audio Playback at ON
  • Canon 2812B004 | VB-C60 Operation Guide - Page 45
    during detecting motion (=ON event). Specify "Enable" so that the camera automatically changes its direction toward a moving subject while the camera is detecting the motion. !2 Maximum Tracking Time (sec.) Set the and OFF event. ● For notes on motion detection use, refer to Start Guide P.xiv. 1-31
  • Canon 2812B004 | VB-C60 Operation Guide - Page 46
    by being triggered by an ON event. 3 OFF Event Operation Select whether or not to activate preset, image upload and e-mail notification when the camera receives no input signal from external devices (=OFF event). Specify "Enable" so that those functions become activated by being triggered by an OFF
  • Canon 2812B004 | VB-C60 Operation Guide - Page 47
    Set Image Buffering, Motion Detection, Audio Playback, Interval Timer (Event) 0 Volume Set the volume for playing a specified sound clip between 1 and 100. The higher the value, the louder the volume. Detailed Settings The following events can be a trigger. Tip • ON event • OFF event Following
  • Canon 2812B004 | VB-C60 Operation Guide - Page 48
    Set Image Buffering, Motion Detection, Audio Playback, Interval Timer (Event) Interval timer events according to "Interval Timer" can be a trigger in the interval Tip timer. Following functions can be set when upload and e-mail notification is set to "Enable". • Upload • E-mail notification Settings
  • Canon 2812B004 | VB-C60 Operation Guide - Page 49
    Access Privileges (Access Control) You can configure following settings. ● Authorized User Account For registering users who can connect to the camera. ● User Authority Configure user privileges for authorized users and guest users. ● Host Access Restriction For specifying hosts from which access
  • Canon 2812B004 | VB-C60 Operation Guide - Page 50
    "Yes" to apply the host list to HTTP server access. Once applied, some user access will be restricted, such as access to the camera from viewers, access to camera's top page and access to setting pages. The list is also applied to image distribution and audio distribution. 3 Apply the list to Image
  • Canon 2812B004 | VB-C60 Operation Guide - Page 51
    . ● If you change the setting of "Host List" or "Apply the list to HTTP Server", the currently-used browser may become unable to access the camera. Be sure to read the note in the "Setting Items That Require a Reboot" page (➞ P.1-43), in advance. 1-37
  • Canon 2812B004 | VB-C60 Operation Guide - Page 52
    Set User Access Privileges (Access Control) The Host Restriction function is to restrict hosts, in which viewers and other client Tip applications are running. Access restriction is available with a list including single or multiple entries, described in the following format. Listing Format " ! "
  • Canon 2812B004 | VB-C60 Operation Guide - Page 53
    1111111111111234567222222222222 1 IPsec Select whether or not to use IPsec from "Manual" and "Disable". 2 IPsec Mode Select the IPsec operation address. 4 Source Address (IPv4/IPv6) Enter the IP address of the source. 5 Security Protocol Select the IPsec protocol to use from "ESP", "AH" or "ESP and
  • Canon 2812B004 | VB-C60 Operation Guide - Page 54
    from "AES", "3DES", "DES" and "NULL" according to the encryption algorithm supported by the destination device. "AES" or "3DES" is recommended to use normally. value as the SPI of another ESP. ■ When "Security Protocol" in 5 is set to "AH" or "ESP and AH", the following setting items must be
  • Canon 2812B004 | VB-C60 Operation Guide - Page 55
    "HMAC_SHA1_96" and "HMAC_MD5_96" according to the authentication algorithm supported by the destination device. !7 SA AH Authentication Key , contact your system administrator. ● If you change the setting of "IPSec", the currently-used browser may become unable to access the camera. Be sure to
  • Canon 2812B004 | VB-C60 Operation Guide - Page 56
    114522 1 LAN Settings required for LAN connection such as IP address (➞ P.1-8) 2 IPv6 Settings for IPv6 use (➞ P.1-9) 3 Installation Conditions Settings for camera's installation conditions (➞ P.1-17) 4 MPEG-4 Settings for video size and frame rate in MPEG-4 (➞ P.1-19) 5 HTTP Server Setting of the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 57
    the currently-used browser may become unable to access to the camera. Click "OK" to apply the setting change. After the camera is rebooted, a candidate URI(s) with which you can connect to the camera is displayed. When reconnecting to the camera, use the displayed URI. If you cannot connect to the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 58
    that you make a note of the current settings before you restore Tip the factory default settings in "Restore the Factory Default Settings" (➞ P.5-14) ● The camera's Reset switch can also be used to restore the factory default settings, but note that this will reset all settings (➞ P.5-15). 1-44
  • Canon 2812B004 | VB-C60 Operation Guide - Page 59
    Chapter VBAdmin Tools This chapter describes how to set up cameras using VBAdmin Tools. You can create panoramas, set a view restriction, presets and motion detection, view logs, and launch the Admin Viewer. You should configure detailed settings as described in Chapter 1 in advance.
  • Canon 2812B004 | VB-C60 Operation Guide - Page 60
    is the main panel of VBAdmin Tools. Each tool is started up from this panel. Install VBAdmin Tools first from the supplied CD-ROM. (→dStart Guide P.2-4) Panorama Creation Tool (→ P.2-6) This tool is used to capture/create a panorama image displaying the full view of the area covered by VB-C60. Once
  • Canon 2812B004 | VB-C60 Operation Guide - Page 61
    the position and size of motion detection areas, and the conditions to judge the timing of motion detection with viewing the video from the camera. Log Viewer (→ P.2-36) This viewer enables viewing of operation status logs output to VB-C60. Admin Viewer (→ P.3-5) This viewer is for the administrator
  • Canon 2812B004 | VB-C60 Operation Guide - Page 62
    Start Up VBAdmin Tools To Start Up... 1. Double-click "VBAdmin Tools v4.0" desktop icon or select "WebView Livescope" → "VBAdmin Tools v4.0" from Programs in the Start menu bar to start up the VBAdmin Tools Starting up from the desktop icon Starting from the Start menu bar 2. Connection Setting
  • Canon 2812B004 | VB-C60 Operation Guide - Page 63
    /XP Note If you start up VB Initial Setup Tool on Windows Vista/XP, Windows Security Alert dialog may appear. If the dialog appears, click "Unblock". Once you click " be launched simultaneously. ● When connecting to another Canon network camera other than VB-C60, you may not be able to use some of
  • Canon 2812B004 | VB-C60 Operation Guide - Page 64
    Panorama Creation Tool This tool is used to create a panorama image displaying the full view of the area covered by VB-C60. When using VB-C60 Viewer to perform pan, tilt, or zoom as well as define presets, you can see, at a glance, which part of the entire viewing area is currently covered.
  • Canon 2812B004 | VB-C60 Operation Guide - Page 65
    Image button Delete a captured panorama image. 7 Position of AE Lock Switch the AE lock position between the center of the panorama image and current camera position. The AE lock function is used to capture image based on exposure level set on the specified position. 8 Indoor dome housing (VB-RD51S
  • Canon 2812B004 | VB-C60 Operation Guide - Page 66
    Panorama Creation Tool Capture Panorama Image How To Capture 1. Click "Capture" to start capturing Change the AE lock position as required. Check the Indoor dome housing (VB-RD51S) option if you are using the optional indoor dome housing. To stop capturing while it is in progress, click "Stop". 2.
  • Canon 2812B004 | VB-C60 Operation Guide - Page 67
    VB Admin Tools. A dialog box asking whether or not to reconnect to VB-C60 appears after VB-C60 restarts. Click "OK" to reconnect to the camera. 2-9
  • Canon 2812B004 | VB-C60 Operation Guide - Page 68
    Panorama Creation Tool Reconnect Reconnections when a connection with VB-C60 has been cut. How To Reconnect Select "Reconnect" from the File menu bar Open/Save Panorama Image from/to Image File You can open an image file as a panorama image, or save a panorama image as an image file. Only JPEG
  • Canon 2812B004 | VB-C60 Operation Guide - Page 69
    VBAdmin Tools View Restriction Tool View Restriction Tool is to restrict the area where the camera can capture. Once you set the view restriction, you can limit the area, within which VB-C60 viewer can display. View Restriction Tool lets you
  • Canon 2812B004 | VB-C60 Operation Guide - Page 70
    View Restriction Tool View Restriction Tool Display Screen 12 3 4 3-1 5 3-2 3-3 6 7 0 9 8 1 Load View Restriction button Loads the view restriction values currently set in VB-C60. 2 Save View Restriction button Saves the view restriction values set and applied using this Tool to VB-C60
  • Canon 2812B004 | VB-C60 Operation Guide - Page 71
    angle is obtained using the "Get value" button. Lower value .. Value for the lower limit of the view restriction. The lower value of the selected camera angle is obtained using the "Get value" button. Left value ...... Value for the left limit of the view restriction. The left value of the selected
  • Canon 2812B004 | VB-C60 Operation Guide - Page 72
    View Restrictions You can change the view restriction values by entering numeric values in the View Restriction Value Input boxes or using the camera angles from the View Restriction Preview Frame or Admin Viewer. Select a suitable method according to your preference or environment. ■ Change Setting
  • Canon 2812B004 | VB-C60 Operation Guide - Page 73
    to Admin Viewer, you should make user authentication (→ P.xiii) 3. Click "Obtain/release Camera Control" in Admin Viewer to obtain the camera control rights VBAdmin Tools Obtain/release Camera Control button 4. Change camera angle to the position you want to set with the Upper, Lower, Left, Right
  • Canon 2812B004 | VB-C60 Operation Guide - Page 74
    set and when it is actually used (→ P.3-20). ● When changing Image Stabilizer or Digital Zoom setting, you need to reconfirm the view restriction. ● Even when view restriction is set, if the camera is controlled to capture near the Tip boundary of the view restrictions, the restricted area may be
  • Canon 2812B004 | VB-C60 Operation Guide - Page 75
    depending on the zoom rate (viewing angle). When the view restriction is set, the camera operation angle is automatically restricted. When a wide-angle is used without changing the camera operation angle, the view restriction is violated, and therefore the operation angle is automatically narrowed
  • Canon 2812B004 | VB-C60 Operation Guide - Page 76
    Preset Setting Tool This tool enables you to easily set presets and home positions visually. They can be set by operating the mouse while referring to a panoramic preview. You can also set the "Preset Tour" settings, which tours through multiple presets to monitor. After setting presets, set Preset
  • Canon 2812B004 | VB-C60 Operation Guide - Page 77
    VBAdmin Tools Preset Setting Tool Preset Setting Tool Display Screen The display screen for Preset Setting Tool is divided into "Preset Settings Area" and "Preset Tour Settings Area". You can set up to 20 presets and home position while referring to a panoramic preview in the Preset Setting Area.
  • Canon 2812B004 | VB-C60 Operation Guide - Page 78
    Tilt ......... Set tilt position of the camera. Zoom ..... Sets angle of view of the camera. ● BLC Set the backlight compensation for the camera. Select "Off" or "On". ● Focus Set focus mode for the camera. Select from "Auto", "Fixed at infinity" or "Manual" (→ P.3-24). 9 Get value button When "Get
  • Canon 2812B004 | VB-C60 Operation Guide - Page 79
    of the Preview frame moves to the clicked position. At this point, you can also adjust the setting position by editing the values in the camera parameters. 3. Click "Apply" Check the Status List to make sure that the values are applied correctly and click "Save Preset Settings" to save the values
  • Canon 2812B004 | VB-C60 Operation Guide - Page 80
    or in the Preset Preview frame. At this point, you can also adjust the setting position by editing the values in the camera parameters. 5. Click "Apply" Check the Status List to make sure that the values are applied correctly and click "Save Preset Settings" to save the values
  • Canon 2812B004 | VB-C60 Operation Guide - Page 81
    manual focusing completes, click "Get value" to set the preset. ● When changing the Image Stabilizer setting, after setting the preset. ● When using a dome housing, set the preset while the dome is installed. ● When changing settings for camera the digital zoom area. ● You can set multiple presets
  • Canon 2812B004 | VB-C60 Operation Guide - Page 82
    top of the list. 4 Delete button Deletes the selected preset. 5 Preview button Reflects the settings for the selected preset in the Preset Preview frame. The camera angle of VB-C60 is also switched based on this preset, which can be confirmed in the Admin Viewer. 6 Auto preset tour Select an option
  • Canon 2812B004 | VB-C60 Operation Guide - Page 83
    value and speed. 9 Pause (sec.) Set the time duration to pause the camera at the preset position in the range of 0-120 seconds in increments of 5 are completed in 28,333 hours. ● Preset Tour is not performed when the camera is controlled with VB-C60 Viewer or another viewer. Tip ● Preset Tour does
  • Canon 2812B004 | VB-C60 Operation Guide - Page 84
    for "Speed (PT)", "Speed (Z)" and "Pause (sec.)" Click "Preview" to reflect the setting values for the selected preset in the Preset Preview frame. The camera angle is switched based on this preset, which can be confirmed in the Admin viewer. 4. Click "Apply" Check the Status List to make sure that
  • Canon 2812B004 | VB-C60 Operation Guide - Page 85
    judge the timing of motion detection with viewing the video from the camera. Setting Motion Detection easily using Motion Detection Setting tool The levels is required, such as for monitoring purposes. Canon accepts no liability whatsoever for faults, etc. resulting from the use of
  • Canon 2812B004 | VB-C60 Operation Guide - Page 86
    Motion Detection" to save the setting values to VB-C60. 3 Live Mode tab (Live/Recorded Video) ● Live Displays the video image and controls the camera. You can also record the displayed video image. ● Video You can set the conditions to judge the timing of motion detection with playing video from
  • Canon 2812B004 | VB-C60 Operation Guide - Page 87
    available in the Setting tab on the right side of the screen. There are two setting tabs available: "Camera" tab and "Area" tab. 2. Set the frame rate and camera direction ("Camera" tab → P.2-30) 3. Set the detection area ("Area" tab → P.2-31) 4. Set the conditions to judge of motion detection at
  • Canon 2812B004 | VB-C60 Operation Guide - Page 88
    motion detection. Enter the value in the range of 0.5-30.0 fps. 2Enable preset selection Check the checkbox, so that you can select a preset for the camera position. The setting value of "Maximum Frame Rate: Image Transmission (→ P.1-19)" should Note be larger than the frame rate set in this tool
  • Canon 2812B004 | VB-C60 Operation Guide - Page 89
    the value. Set a higher value to detect with a high sensitivity. 4Auto button Click "Auto" to automatically set the sensitivity for motion detection. The camera detects motion when changes in the subjects in the detection area are bigger than the set sensitivity. Click the button when there is no
  • Canon 2812B004 | VB-C60 Operation Guide - Page 90
    area frame is set in the viewer can display them in the same manner. 4. Check the motion detection status of the camera Check "Display motion detection status of the camera" to confirm the status of the motion detection with the settings you have configured. The motion detection status is displayed
  • Canon 2812B004 | VB-C60 Operation Guide - Page 91
    Motion Detection Setting Tool ● The "Motion detected (peak block display)" and "Display motion detection status of Tip the camera" displays in this tool, and the actual detection status of the VB-C60 may not match perfectly. ● When the Motion Detection function of the VB-
  • Canon 2812B004 | VB-C60 Operation Guide - Page 92
    Indicator color Green Peak block When a change in the video meets the conditions set in both "Size" and "Duration" and the status of the camera becomes "Detected", a red peak block appears. You need to set the detection sensitivity with checking the level of motion at wihich level a peak block
  • Canon 2812B004 | VB-C60 Operation Guide - Page 93
    is clicked. Set it in the range of 0-30 seconds. 2. Adjust the camera position and click "Rec. Start" in the "Live" tab Recording of the video displayed in the viewer starts. Make some motions in front of the camera to record a video to be used for setting the motion detection sensitivity.
  • Canon 2812B004 | VB-C60 Operation Guide - Page 94
    Log Viewer Log Viewer enables viewing of operation status logs of the camera. ● Log Viewer only displays a log. You cannot delete the log. Tip ● To save the log, select "File" → "Save" from the menu bar. The log is
  • Canon 2812B004 | VB-C60 Operation Guide - Page 95
    Log Viewer View Logs The following information is included in a log. ● Code The log codes are displayed. See "Log Message List" (→ P.5-6) for the log codes. One of following three icons is displayed with each log code, depending on the log level. Logs without a log code are displayed without an
  • Canon 2812B004 | VB-C60 Operation Guide - Page 96
    logs are displayed, like "View Log Events" (→ P.1-44) in "Maintenance" in camera's setting page. ■ Select and View Logs by condition Logs can be filtered according to module to output the logs from "Application", "HTTP Server", and "System". ● Specify code Specify the code of the logs. The codes are
  • Canon 2812B004 | VB-C60 Operation Guide - Page 97
    & time When this item is selected and a date and time is entered, logs generated before the specified end date and time are displayed. "Application" and "System" correspond to the list of log messages (→ P.5-6). Tip 2-39
  • Canon 2812B004 | VB-C60 Operation Guide - Page 98
  • Canon 2812B004 | VB-C60 Operation Guide - Page 99
    Chapter VB-C60 Viewer This chapter describes how to use the VB-C60 viewer with which you can access a camera via a Web browser to view live videos, control the pan, tilt and zoom, exposure mode, night mode, white balance, focus, smart shade control, and other functions.
  • Canon 2812B004 | VB-C60 Operation Guide - Page 100
    includes 2 viewers: Admin viewer and VB viewer. Admin Viewer VB-C60 Viewer VB Viewer Use the VK-Lite viewer to view MPEG-4 video from the camera. Note The VB-C60 viewer can display JPEG video only. Major Differences between Admin Viewer and VB Viewer ●Operational Items Admin Viewer : In addition
  • Canon 2812B004 | VB-C60 Operation Guide - Page 101
    start up the VB viewer. If all privileges are disabled, Authorized users cannot start up even the VB viewer. Guest users Guest users can control camera's pan/tilt/zoom, backlight compensation, video display and audio distribution only. The VB viewer can be started from the "VB Viewer" link on the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 102
    of External Device Input, displaying detection of Motion Detection Area, controlling External Device Output All operations in VB Viewer Details Controlling camera's PTZ, switching on/off of backlight compensation, changing video display size, switching on/off of audio reception, reconnecting to the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 103
    VB-C60 Viewer Start up VB-C60 Viewer Various settings of the VB-C60 viewer are available by accessing to the camera via a Web browser. First, access the Settings Title Page. In this guide, IP address "192.168.100.1" (factory default setting) is used to explain how Note to set up the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 104
    VB-C60 Viewer How To Close Close the Web browser that is displaying the viewer. Connect from the VBAdmin Tools It is a viewer to control cameras as the administrator. How To Start Up 1. Start the VBAdmin Tools (For details on how to start the VBAdmin Tools, see Chapter 2 "VBAdmin Tools
  • Canon 2812B004 | VB-C60 Operation Guide - Page 105
    4. The Admin viewer starts in a Web browser Starting VB-C60 Viewer Be sure to enter the correct user name and password. If entering a wrong one, try Note again with the correct name and password. VB-C60 Viewer 3-7
  • Canon 2812B004 | VB-C60 Operation Guide - Page 106
    !!0!922222226 5 2 1 11!229 11@221 11@220 1122 11@222 @4 11@225 @113 1 Video Capture Size Select the size for receiving video from the camera. 2 Video Display Size Select the size for displaying video. 3 Full Screen Mode button Click to view live video in the full screen mode. 4 Pause/Resume
  • Canon 2812B004 | VB-C60 Operation Guide - Page 107
    Page button Click to move to the Setting Menu page. !8 Top Page button Click to move to the camera's top page. !9 Focus Click to control the focus. @0 Exposure Use to control the exposure. @1 Camera Control button Click to control the pan/tilt/zoom. You can also change the speed. @2 External Device
  • Canon 2812B004 | VB-C60 Operation Guide - Page 108
    VB vie113w2211e4r2211is522st33arted. 11622 1102211!221 1117222 1111!8922222 1 Video Capture Size Select the size for receiving video from the camera. 2 Video Display Size Select the size for displaying video. 3 Pause/Resume button Click to pause the video display. Click
  • Canon 2812B004 | VB-C60 Operation Guide - Page 109
    button Control being obtained Blue Orange Blue White Control being released Gray Blue Gray Light blue When a guest user is queued for the camera control privilege, the stand-by time is displayed in the "Control Privilege Status Indicator". While the video is being paused (➞ P.3-18), a pause icon
  • Canon 2812B004 | VB-C60 Operation Guide - Page 110
    . Slide the knob on the scroll bar for pan or tilt The camera angle changes according to the knob position on the scroll bar. You the tilt angle (up/down) of the camera. Scroll bar for pan Use this scroll bar to change the pan angle (right/left) of the camera. VB Viewer You can move the center of
  • Canon 2812B004 | VB-C60 Operation Guide - Page 111
    becomes the center of the image. Move by dragging Drag the yellow-framed area on the Panorama image to change the pan and tilt angles. ● Cameras are not controlled with high accuracy, by clicking on an image of the Tip VB-C60 viewer. ● The Administrator can control the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 112
    is ON) Scroll bar for zoom Slide up to zoom in (telephoto) Slide down to zoom out (wide-angle) Wide end ● When "Digital Zoom" is set to "Enable" in the "Camera" menu in the setting page, Tip an icon indicating the optical tele end is displayed (➞ P.1-15). ● You can also control the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 113
    the yellow frame and drag the mouse, a blue frame is drawn. Tip When you release the mouse, the blue frame changes to yellow and the camera's pan, tilt, and zoom change and move to capture the new yellow-framed area. 3-15
  • Canon 2812B004 | VB-C60 Operation Guide - Page 114
    P.2-18). How To Operate 1. Display the preset dropdown list by clicking the Preset Selection box 2. Select a preset from the list to change the camera angle Preset Selection box You need to set presets using VBAdmin Tools in advance (➞ P. 2-21). Registered Tip presets are displayed in the Preset
  • Canon 2812B004 | VB-C60 Operation Guide - Page 115
    Settings You can change the video capture size and the video display size, switch to the full screen mode, pause/resume video, reconnect to the camera and start/stop receiving audio. Admin Viewer VB Viewer VB-C60 Viewer ■ Change the Video Capture Size You can select the size for receiving video
  • Canon 2812B004 | VB-C60 Operation Guide - Page 116
    How to Operate the VB-C60 Viewer ■ Full Screen Mode (only in the Admin viewer) You can display the video at full-screen size. Click the button to launch a new window at full screen size. Click the close button on the full-screen window to close. ■ Pause/Resume Video You can pause and resume the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 117
    . How to Operate the VB-C60 Viewer Click the button to reconnect to the camera After reconnecting to the camera, audio reception is stopped. In addition, the camera Tip control privilege is lost, and the video capture size and the video display size are restored to the default settings. ■ Audio
  • Canon 2812B004 | VB-C60 Operation Guide - Page 118
    Viewer Display Information Information and warning messages are displayed. ¡ Information Message The icon is displayed in blue. This type of messages is displayed when the camera is operated properly. It displays help messages for buttons and pull-down menus, pan/tilt/zoom information from the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 119
    section describes operations and settings, which are available only in the Admin viewer. Open the Control for Admin Panel How To Operate 1. Click "Obtain/Release Camera Control" to obtain the camera control privilege 2. Click "Control for Admin" 3. The Control for Admin panel is displayed 3-21
  • Canon 2812B004 | VB-C60 Operation Guide - Page 120
    Operation and Setting as Administrator Control the External Device Output You can control the external device output and display the current status with icons. Click the icon to switch on/off. Example Top : Output OFF Bottom : Output ON Display the Status of External Device Input The status of
  • Canon 2812B004 | VB-C60 Operation Guide - Page 121
    VB-C60 Viewer Operation and Setting as Administrator Control and Set the Camera You can control the camera and change the speed using the Camera Control buttons. 11122 11222 11322 11422 1 Pan/Tilt button You can pan and tilt the camera in the direction of arrows. Hold down the button to keep moving
  • Canon 2812B004 | VB-C60 Operation Guide - Page 122
    " or "Fixed at infinity". Auto : The focus is adjusted automatically. Manual : Hold down the (Far) or (Near) button to adjust the focus. When you click "One-shot AF", it automatically focuses the camera and then return to the "Manual" mode again. Fixed at infinity : Focus is fixed at a point
  • Canon 2812B004 | VB-C60 Operation Guide - Page 123
    operations. 11122 11222 11322 11422 VB-C60 Viewer 1 Exposure Mode Select from "Auto", "Manual", "Auto (Flickerless)" or "Auto (Shutter Speed)". When using the camera while setting "Day/Night" to "Auto" in the "Camera" menu in the setting page (➞ P.1-16), use "Auto", "Auto (Flickerless)" or "Auto
  • Canon 2812B004 | VB-C60 Operation Guide - Page 124
    When "Auto (Shutter Speed)" is set, select between "1/8 sec" and "1/8000 sec" from the pull- down menu. 5 Aperture When the Exposure Mode is set to "Manual", 11522 11622 set the aperture value. The further to the left you move the slider, the more closed the aperture and the darker the image
  • Canon 2812B004 | VB-C60 Operation Guide - Page 125
    the pull-down menu according to the light source conditions. Daylight Fluorescent : Select when using the camera in daylight fluorescent lighting. White Fluorescent : Select when using the camera in neutral white or cool white fluorescent lighting. Warm Fluorescent : Select when using the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 126
    Night Mode Switch between "Day Mode" and "Night Mode". The Night Mode cannot be used when Tip "Day/Night" is set to "Auto" in the "Camera" menu on the setting page (➞ P.1-16). Day Mode: You can view color video in the normal mode. Night Mode: The infrared cut filter is removed
  • Canon 2812B004 | VB-C60 Operation Guide - Page 127
    Chapter Creating Web Pages for Video Distribution This chapter describes how to use the VB-C60 to webcast information. Image data can be distributed in various ways, including displaying video or still images and displaying multiple images on a Web page.
  • Canon 2812B004 | VB-C60 Operation Guide - Page 128
    Web Pages for Video Distribution To distribute image data using VB-C60, you need to create a dedicated Web page. The viewer that can be used with VB-C60 is "VB-C60 Viewer", which allows you to set detailed parameter settings. Dedicated Web server HTTP (WWW) server 2 Notify Internet
  • Canon 2812B004 | VB-C60 Operation Guide - Page 129
    Creating Web Pages for Video Distribution Web Pages for Video Distribution VB-C60 is equipped with a built-in Web server. If the content of the Web pages used Note for distributing video is stored onto the built-in flash memory in VB-C60, the VB-C60 can be used both for distributing Web pages and
  • Canon 2812B004 | VB-C60 Operation Guide - Page 130
    you wish to view. ■ Examples of sample pages Still image sample Video sample This is a sample page, which retrieves still images to display from the camera. Sample for mobile phones This is a sample page, which displays live videos. This is a still image display sample page with the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 131
    Creating Web Pages for Video Distribution Distribute Video using VB Viewer This section describes how to use the VB Viewer to distribute video. Application examples are also given. Create a Web Page using the VB Viewer You can incorporate and display the VB Viewer in the Web page.
  • Canon 2812B004 | VB-C60 Operation Guide - Page 132
    as a file under /usr/www/html/local. Device On-board flash memory File system (accessed by an ftp client) ftp://IP address/usr/www/html/local URI (accessed the minimum amount of data required is stored in the flash memory. ● Camera's setting change may not be available if web pages' data size is
  • Canon 2812B004 | VB-C60 Operation Guide - Page 133
    Creating Web Pages for Video Distribution Distribute Video using VB Viewer sample.htm VB Viewer Sample Page LiveApplet
  • Canon 2812B004 | VB-C60 Operation Guide - Page 134
    Distribute Video using VB Viewer VB Viewer Parameters You can specify parameters to provide a Web page to modify the behavior or appearance of Web pages. Ensure that you thoroughly understand the parameters. ■ object tag description Attribute name Omissible Description Specifies the URL of the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 135
    Creating Web Pages for Video Distribution Distribute Video using a Browser Only You can also use the WebView-HTTP protocol to distribute video from VB-C60. Some examples are described in this section. Display the Live Video at Access as a Still Image When a client accesses the Web page that
  • Canon 2812B004 | VB-C60 Operation Guide - Page 136
    videos on the Internet. An Internet service provider (ISP) that offers a single-address fixed global address service can be used. In this case, 168.100.2 Router 192.168.100.1 Internet Viewer PC Web server Add support for private address 192.168.100.2 (router NAT function). Global address 192
  • Canon 2812B004 | VB-C60 Operation Guide - Page 137
    Creating Web Pages for Video Distribution Distribute Still Images to a Mobile Phone You can view still images and control the camera using the Web service of a mobile phone. You can easily create still image distribution pages for mobile phones with HTML, which uses the command image.cgi. Sample
  • Canon 2812B004 | VB-C60 Operation Guide - Page 138
    downward. tilt Example:20 degrees to upward ⇒ tilt=2000 15 degrees to downward ⇒ tilt=-1500 zoom Specifies the zoom angle (horizontal) of the camera in units of 0.01. Example:50 degree angle ⇒ zoom=5000 5 degree angle ⇒ zoom=500 Specifies the image size using the following formats. v QQVGA
  • Canon 2812B004 | VB-C60 Operation Guide - Page 139
    Creating Web Pages for Video Distribution Distribute Still ImaÍges to a Mobile Phone For pan, tilt and zoom, you can specify the relative position from the current position Tip using "d", which indicates the current position. Example: Panning 10 degrees to the right from the current position ⇒ pan
  • Canon 2812B004 | VB-C60 Operation Guide - Page 140
  • Canon 2812B004 | VB-C60 Operation Guide - Page 141
    Chapter Appendix
  • Canon 2812B004 | VB-C60 Operation Guide - Page 142
    (blank character/for interval timer and test)" %X Image width Number of horizontal pixels %Y Image height Number of vertical pixels %C Camera number %D Camera name "Camera name (alphanumeric characters)" %P Pan position -179.99 ~ 180.00 %T Tilt position -179.99 ~ 180.00 %Z Zoom position
  • Canon 2812B004 | VB-C60 Operation Guide - Page 143
    Appendix 5-3
  • Canon 2812B004 | VB-C60 Operation Guide - Page 144
    Troubleshooting Before you contact your Canon dealer or contact support, check the items listed below. If a log message is displayed, refer to the log message list for the detail and the countermeasure. The camera Power Off then On the camera (➞ dStart Guide P.2-7). The camera stops responding to VB
  • Canon 2812B004 | VB-C60 Operation Guide - Page 145
    Appendix Troubleshooting Video recording steam cannot be used ● The stream for recording is not available when HTTP upload or FTP upload is enabled in "Upload" in the "Upload" menu. In order to use the steam for recording, set "Upload Disabled" in "Upload" (➞ P.1-21). Cannot control the camera ●
  • Canon 2812B004 | VB-C60 Operation Guide - Page 146
    level failure (task operation stops) A failure affecting camera operation (task continues) A failure not affecting the camera operation A failure external to the system Information regarding normal operation ■ Application Messages (Camera) ●A030 WebView Livescope client start and stop Message
  • Canon 2812B004 | VB-C60 Operation Guide - Page 147
    After video input was stopped, the video input system was reset. If the problem persists, it is a camera failure. ●A350 Camera control system Message Explanation Countermeasure camera status timeout - resetting (A350) The camera control system was reset because a communication timeout with the
  • Canon 2812B004 | VB-C60 Operation Guide - Page 148
    Log Message List ■ Application Messages (Uploader) ●A004 Uploader start and stop [info] Message %1 Explanation %1 uploader (A004) Start (starting) or stop (stopping) The uploader has started or stopped. ●A120 Upload destination name resolution failed [notice] Message Explanation uploader
  • Canon 2812B004 | VB-C60 Operation Guide - Page 149
    uploader initialization failure - %1 (A470) Error number The uploader initialization failed. If this is not resolved after a reboot, it is a camera failure. ■ Application Messages (Audio Server) ●B001 Audio server start and stop [info] Message %1 Explanation %1 wvaudio starting | shutdown The
  • Canon 2812B004 | VB-C60 Operation Guide - Page 150
    the user name, password, or user list. 43: Reconnect or reboot the camera. 45-46: Use supported client software. 49: Check the setting of the number of clients. 4a device error was detected. Reboot the camera. If the problem persists, ask for service. ●B401 Audio device initialization failed [crit
  • Canon 2812B004 | VB-C60 Operation Guide - Page 151
    Message Explanation serviceman call (S240) The camera may have an error. Ask for service. ●S306 Error in saving setting values [err] Message Explanation Countermeasure Can't update system settings (S306) An error occurred when saving setting values in the system. The setting values failed to be
  • Canon 2812B004 | VB-C60 Operation Guide - Page 152
    camera, camera. Reconnect button Starts/Stops receiving audio. Audio Reception button Displays camera camera's image to the clicked position. Video Display area Displays the panorama image as a camera control. Panorama Display area Controls the camera communication with the camera. This message
  • Canon 2812B004 | VB-C60 Operation Guide - Page 153
    by an Admin viewer or other reasons. The camera is not available for free accesses. Failed to establish audio connection. Please connect to the camera. The viewer cannot connect to the camera due to the address restriction or out of service hours. Connection to receive audio failed. You attempted
  • Canon 2812B004 | VB-C60 Operation Guide - Page 154
    Restore the Factory Default Settings Since VB-C60 supports various functions, it is recommended to take Maintenance Menu Using a Web Browser 1. Start a Web browser and access the camera's setting page The camera's IP address, user name and administration password are required to display the setting
  • Canon 2812B004 | VB-C60 Operation Guide - Page 155
    network. In this case, press the reset switch on the rear of the camera. 1. Power off the camera For information on how to power on/off the camera, refer to "Turning ON / OFF" (➞ d Start Guide P.2-7). 2. Switch on the camera with holding down the reset switch, then keep holding the reset switch for
  • Canon 2812B004 | VB-C60 Operation Guide - Page 156
    Initial Settings AE Mode Auto Slow Shutter Disable Shutter Speed 1/100 Focus Mode Auto ● Camera Control Digital Zoom Disable Image Stabilizer Disable ● Day/Night Mode Manual Switching Brightness Standard Response (sec.) 20 ● Installation Conditions Dome Not used LED Setting
  • Canon 2812B004 | VB-C60 Operation Guide - Page 157
    POP Server Subject Message ● Image Server Maximum Number of Clients 30 Camera Control Queue Length 30 Maximum Connection Time (sec.) 0 Camera Control Time (sec.) 20 ● Audio Server Audio Transmission from the Camera Disable Input Volume 50 Voice Activity Detection Disable Audio Reception
  • Canon 2812B004 | VB-C60 Operation Guide - Page 158
    User Account Password User List ● User Authority Authorized user Privileged Camera Control Checked Camera Control Checked Image Distribution Checked Audio Distribution Checked Guest user Camera Control Checked Image Distribution Checked Audio Distribution Checked ● Host Access
  • Canon 2812B004 | VB-C60 Operation Guide - Page 159
    Key (inbound) SA AH SPI (inbound) ● IPsec Set 2 IPsec IPsec Mode Destination Address (IPv4/IPv6) Source Address (IPv4/IPv6) Security Protocol Security Gateway Address (IPv4/IPv6) Destination Prefix Length SA ESP Encryption Algorithm SA ESP Authentication Algorithm SA ESP Encryption Key (outbound) SA
  • Canon 2812B004 | VB-C60 Operation Guide - Page 160
    Authorized User 3-3 B Backlight Compensation 2-20, 3-9, 3-16 C Camera Control 1-15 Camera Name 1-13 Camera Parameters 2-20 Camera Position Control 1-17 D Date 1-11 Date and Time 1-11 Day/Night 1-16 Default Gateway Address 1-8 Digital Zoom 1-15 DNS 1-7, 1-9 E Echo Canceller 1-27 E-mail
  • Canon 2812B004 | VB-C60 Operation Guide - Page 161
    Slow Shutter 1-14 Smart Shade Control 3-28 SNMP 1-10 Status List 2-13, 2-20 Subnet Mask 1-8 T Tilt 2-17, 2-20 Time 1-11 Time Zone 1-12 Troubleshooting 5-4 U Upload 1-21 User Account 1-35 User Authority 1-35, 3-3 User List 1-35 User Name 1-22 V VB Viewer 3-10 VBAdmin Tools 2-2 VB-C60
  • Canon 2812B004 | VB-C60 Operation Guide - Page 162
    Shimomaruko 3-chome, Ohta-ku, Tokyo 1468501, Japan CANON U.S.A.,INC. One Canon Plaza Lake Success, NY 11042-1198 USA ● If you have any questions, call the Canon U.S.A. Information Center toll-free at 1-800-828-4040 (U.S.A. only) CANON CANADA INC. NATIONAL HEADQUARTERS 6390 Dixie Road, Mississauga
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
Before using the product, be sure to read the Start Guide and this Operation Guide.
NETWORK CAMERA
Operation Guide