Canon 2812B004 VB-C60 Operation Guide - Page 83
Speed Z, Pause sec.
UPC - 013803099478
View all Canon 2812B004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Preset Setting Tool 8 Speed (Z) Sets the camera speed for zooming within a range of 1-2. Scrolling the slide bar from left to right increases the value and speed. 9 Pause (sec.) Set the time duration to pause the camera at the preset position in the range of 0-120 seconds in increments of 5 seconds. When the following warning message appears, you may need to change the settings Note by referring to the following table. Example of warning message VBAdmin Tools *The tour schedule shown in the screen changes depending on the setting. Press Cancel to return to the setting screen. Press OK to save the setting data without changing it. (When using the Preset Setting Tool, click "Save" in the setting page.) The standard durability of the pan/tilt mechanism is 300,000 round trips at full angle operation. The entire tour time is determined by the combination of movement speed, movement range and pause duration. Refer to the following tables for the settings. Total tour hours (guideline) of Preset Tour in the panning direction until reaching to 300,000 round trips Setting Speed (PT) to 1 Setting Speed (PT) to 2 Pause Pan Direction Movement Range (degree) Pause Pan Direction Movement Range (degree) (sec.) ±50 ±100 ±150 (sec.) ±50 ±100 ±150 0 11616 11475 11427 0 5950 5808 5761 10 17000 14166 13222 10 11333 8500 7555 20 22666 17000 15111 20 17000 11333 9444 30 28333 19833 17000 30 22666 14166 11333 (Unit: hour) (Unit: hour) Example: When Speed (PT) is 1, Pause is 30 seconds and Pan Direction Movement Range (angle) is ±50, 300,000 round trips are completed in 28,333 hours. ● Preset Tour is not performed when the camera is controlled with VB-C60 Viewer or another viewer. Tip ● Preset Tour does not work while VK-64/VK-16 (option), VK-Lite or Motion detection Tool is connecting with the camera. 2-25