Canon 2812B004 VB-C60 Operation Guide - Page 54
SA ESP Encryption Key inbound
UPC - 013803099478
View all Canon 2812B004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Set IPsec (IPsec) 11111111111111119!8!!!!!2222222222222222120543 8 SA ESP Encryption Algorithm Select the ESP encryption algorithm from "AES", "3DES", "DES" and "NULL" according to the encryption algorithm supported by the destination device. "AES" or "3DES" is recommended to use normally. 9 SA ESP Authentication Algorithm Select the ESP authentication algorithm from "HMAC_SHA1_96", "HMAC_MD5_96" and "No Authentication" according to the authentication algorithm supported by the destination device. If only "ESP" is used, "None" cannot be selected. 0 SA ESP Encryption Key (outbound) Set the SA encryption key for outbound. Set a hexadecimal value that corresponds to 128bit if "AES" is selected in 8, 192bit if "3DES" or "64bit if "DES". If "NULL" is selected, this setting is not necessary. !1 SA ESP Authentication Key (outbound) Set the SA authentication key for outbound. Use a hexadecimal value that corresponds to 160bit if "HMAC_SHA1_96" is selected in 9 or 128bit if "HMAC_MD5_96". If "None" is selected, this setting is not necessary. !2 SA ESP SPI (outbound) Set the SA SPI value for outbound. Set it in the range of 256 - 4294967295. !3 SA ESP Encryption Key (inbound) Set the SA encryption key for inbound. Set a hexadecimal that corresponds to 128bit if "AES" is selected in 8, 192bit if "3DES" or "64bit if "DES". If "NULL" is selected, this setting is not necessary. !4 SA ESP Authentication Key (inbound) Set the SA encryption key for inbound. Set a hexadecimal that corresponds to 160bit if "HMAC_SHA1_96" is selected in 9 or 128bit if "HMAC_MD5_96". If "None" is selected, this setting is not necessary. !5 SA ESP SPI (inbound) Set the SA SPI value for inbound. Set it in the range of 256 - 4294967295. Since the setting value is used as an ID number to identify SA, do not specify the same value as the SPI of another ESP. ■ When "Security Protocol" in 5 is set to "AH" or "ESP and AH", the following setting items must be configured. 1-40