Canon ACANDW100K1 User Guide - Page 20

For Users of the Canon HD Camcorder HG10 Thank you for purchasing the OW-100 OVO Burner. In order to connect the OVO Burner to your camcorder and create discs, you will need to perform a one-time update of the camcorder's firmware. In this guide you will find step-by-step instructions how to update the system (rn 2) and how to create and play back discs using the OVO Burner (rn 4). 1 Updating the HG10's Firmware Updating your camcorder's firmware is very simple and consists of two parts. First, you will transfer the updated firmware to the camcorder and then you will update the firmware on the camcorder itself. The whole procedure can be completed within about 5 minutes. Transferring the New Firmware to the HG10 In this step you will transfer the new firmware included in the supplied CD-ROM HG10 System Update Disc to your camcorder. During the update procedure the disc tray of the DW-100 DVD Burner may open automatically; do not push it close. Closing the disc tray may result in the procedure not being completed correctly or in a malfunction of the DVD Burner. If you placed the DVD Burner in a closed cabinet, leave the cabinet's door open so the disc tray can open unobstructed. On the DW-l00 DVD Burner 1 Press the POWER/MODE button to turn on the DVD Burner. 2 Press the OPEN/CLOSE button. The disc tray will open. 3 Place the HG10 System Update Disc CD-ROM on the disc tray but leave the disc tray open. On the HG10 HD Camcorder 4 Power the camcorder using the compact power adapter. 5 Move the I~ /0 switch to .~ (Movies). 6 Turn the Imlml switch to ON, then turn it toward MODE and release it, to set the camcorder in PLAY mode. The green PLAY indicator will turn on. 2 7 Connect the camcorder to the DVD Burner using the supplied USB cable. On the DW-l00 DVD Burner 8 Press the OPEN/CLOSE button while holding pressed down the red start button (e). • The disc tray will close automatically and the REC, PLAY and start indicators will flash as the new firmware is transferred to the camcorder. • After a short while the REC indicator will stay on, the PLAY and start indicators will go off and the disc tray will open and close automatically. • Do not touch the camcorder or the DVD Burner and do not perform any other operation while the transfer is in progress. • Do not close the disc tray when it opens automatically. 9 After the index screen is displayed on the camcorder, make sure that the DVD Burner is off. • The firmware's transfer is completed when the DVD Burner turns off automatically. • Disconnect the USB cable and remove the CD-ROM from the DVD Burner.