Canon BJ-10E Service Manual - Page 21
Switch, Functions
View all Canon BJ-10E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
1.2 DIP Switch Functions The default printer control modes are selected with the DIP switch selector 11. The functions of other DIP switch selectors differ according to the selected control mode. Mode 1 is the factory setting. 1.2.1 Mode 1/Mode 2 Selector No. Function 1*' Auto sheet feeder mode 2# 2 Graphics image density 3*3 Automatic line feed 4 Page length 5 Character set 6*4 Automatic carriage return 7# 5 Alternate graphics mode 8 Receive buffer/download memory size 9*6 Code page I0*' Mode 1/Mode 2 selection 11 Printer control mode Selector position ON OFF Enable Disable Normal High CR with LF CR only 305 mm (12") 279 mm (11") Set 2 Set 1 LF with CR LF only Enable Disable 3KB/34KB 37KB/0KB Factory setting OFF OFF OFF OFF OFF OFF OFF OFF Multilingual 850 Mode 2 USA 437 Mode 1 OFF OFF LQ BJ-10e OFF *1. When you use the optional auto sheet feeder, set the selector 1 to ON. *2. When the selector 2 is OFF, the printer prints in a higher density graphics print image (full bit-mapped print). When this switch is ON, the printer does not print the odd bits in mapped odd slices or the even bits in mapped even slices. *3. When the selector 3 is ON, the printer makes an automatic line feed when receiving a CR code. *4. When the selector 6 is ON, the printer makes an automatic carriage return after a line feed is performed. *5. When the selector 7 is ON, the printer accepts high resolution 24-dot all point addressable (APA) graphics commands similar to those used with the conventional 24-dot printers. *6. This printer has two charater fonts-USA code page 437 for US character set and multilingual code page 850 for European character set. Select the appropriate code page for your country. *7. When this selector is OFF, the printer becomes compatible with IBM Proprinter X24E. When this selector is ON, the printer becomes compatible with Canon BJ-130e. IV-2