Canon BJC6500 Service Manual - Page 109
INSTALLATION, Printer Dimensions - bjc user manual
View all Canon BJC6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
BJC-6500 Part 5: REFERENCE 3. INSTALLATION 3.1 Installation For detailed procedures, refer to the User's Manual. 3.1.1 Installation location To ensure optimum performance, install the printer where there is adequate space. The figure below illustrates the printer's outside dimensions. Approx. 275 mm REFERENCE Approx. 270 mm Approx. 470 mm Approx. 195 mm Figure 5-21 Printer Dimensions 3.2 Installation Procedures To avoid problems regarding electrical differences between the computer and the printer, after connecting the interface cable, connect the plug of the power cord to an electrical outlet. 3.2.1 Connecting the interface cable 1) Make sure both the printer and the computer are switched OFF. 2) Connect the interface cable to the interface connector on the printer. Lock the connector clips. 3) Connect the other end of the interface cable to the computer, and lock into place. 3.2.2 Connecting the power supply 1) Connect the plug of the power cord to a wall outlet. 2) Press the printer's POWER button. The beeper sounds once and the indicator blinks in green indicating that the printer is in the initialization process. After initialization, the indicator lights in green. If BJ cartridges are not installed, the indicator lights in orange, the beeper sounds six times, and the carriage moves to the cartridge replacement position. 5-19